User manual HUSQVARNA HECT151B

[. . . ] Never let the guide bar tip come in contact with any object. Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. If your machine bears this symbol it is equipped with a catalytic converter. Filing with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. Other symbols/decals on the machine refer to special certification requirements for certain markets. [. . . ] The bulb need not be completely filled. If the machine is fitted with a decompression valve (B): Press the valve to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Once the machine has Push in the choke control as soon as the engine fires and make repeated starting attempts. Immediately press and release the throttle when the engine starts. As the chain brake is still activated the engine must return to idling speed as soon as possible by disengaging the throttle English – 21 STARTING AND STOPPING latch in order to avoid unnecessery wear on the clutch assembly. • Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. Note!Pull the front hand guard towards the front handle. Your saw is ready for use. • ! • WARNING!Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. Small branches can be grabbed by the chain and thrown back at you, causing serious injury. 10 Check the chain tension. General working instructions IMPORTANT!This section describes basic safety rules for using a chain saw. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you are not sure you can handle!Before using a chain saw you must understand the effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback. Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment. See instructions under the heading Personal protective equipment. 4 Make sure you can move and stand safely. [. . . ] Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Make sure that the area in which you are cutting is free from obstacles. [. . . ]