User manual HUSQVARNA HEYTH180E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUSQVARNA HEYTH180E. We hope that this HUSQVARNA HEYTH180E user guide will be useful to you.

Lastmanuals help download the user guide HUSQVARNA HEYTH180E.


Mode d'emploi HUSQVARNA HEYTH180E
Download
Manual abstract: user guide HUSQVARNA HEYTH180E

Detailed instructions for use are in the User's Guide.

[. . . ] Do not use on slopes of more than 10°. Remember there is no such thing as a "safe" slope. To guard against controls and the proper use of the equipment. overturning; · Never allow children or people unfamiliar with the ins- do not stop or start suddenly when going up or tructions to use the lawnmower. [. . . ] Connect the red cable to + and then the black earth cable to -. Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. ⷠAdjust gauge wheels with tractor on a flat level surface. With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Quick lifting/lowering of the cutting unit 7. The accelerator control regulates the motor speed and also the speed of the blades. Full speed lies between these two positions. When the pedal is pushed down the brake is applied and the motor is disengaged. The gear box has positions forward, neutral and reverse. Gear changing can take place from neutral to top gear without stopping in each gear position. The oil level in the engine should be checked before each run. The oil level should lie between the two markings on the oil stick. If more oil is needed add SAE 30 oil to the "FULL" marking. SAE 5W-30 oil should be used during the winter (below freezing point). Tire air pressure Check the tire pressure regularly. The pressure in the front tires should be 1 bar (14 PSI) and 0. Make sure that the cutting unit is in the transport position (top position) and that the lever for connection/disconnection of the cutting unit is in the disconnection position. Press down the clutch/brake pedal completely and hold down. Turn the ignition key to "START position". Do not run the start motor more than 5 seconds at once. If the engine will not start, wait about 10 seconds before the next try. [. . . ] To open valve, push in slightly, turn counterclockwise and pull out. ⷠTo close valve, push in and turn clockwise. FILL IN DATES AS YOU COMPLETE REGULAR SERVICE As Needed Every 8 hours Every 25 hours Every 50 hours Every 100 hours Every 200 hours For best results mower blades must be kept sharp. Sharpening can be carried out with a file or grinding disc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA HEYTH180E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA HEYTH180E will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag