User manual HUSQVARNA LB48 V

[. . . ] Never use the machine if persons, especially children or pets, are in the immediate vicinity. The ignition lead should always be removed from the spark plug before repair, cleaning or maintenance work. Switch off the engine by releasing the engine brake handle before carrying out any checks or maintenance. This product is in accordance with applicable EC directives. [. . . ] contact your dealer , service agent or an experienced lawn mower user. Avoid all usage which you consider to be beyond your capability Look around you: - To ensure that people, animals or other things cannot affect your control of the machine. - To make sure that none of the above might come into contact with the cutting equipment. Should be removed from the lawn before you start to mow. Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. Never lift up the lawn mower or carry it around when the engine is running. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug. Never start the machine: 1 2 3 If you have spilt fuel or engine oil on the machine. Wipe off the spill and allow the remaining fuel to evaporate. If you spill fuel or engine oil on yourself or your clothes. If you must lift the lawn mower, first switch off the engine and disconnect the ignition lead from the spark plug. Make sure the cutter does not hit foreign objects such as stones, roots or the like. This can make the cutter dull and bend the engine shaft. A bent axle gives imbalance and heavy vibration, which results in a great risk of the cutter becoming loose. Never mow more than 1/3 of the length of the grass. This especially applies during dry periods. mow first with the cutting height set high. Then check the result and lower to an appropriate height. If the grass is really long, drive slowly and mow twice if necessary. Do not set the cutting height too low as there is a risk that the cutters might hit slopes with unevenness. Shut down the engine before changing the cutting height. [. . . ] If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check If the cutter hits foreign objects such as stones, roots or the like the cutter will slip against the cutter bracket. This may mean that the contact surface of the cutter bracket appears slightly worn, which is completely normal. This is a safety device, which reduces the risk of the engine shaft becoming bent. [. . . ]