User manual HUSQVARNA PP 480 HF

[. . . ] Please read the operator's manual carefully and make sure you understand the instructions before using the machine. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Approved protective helmet Approved hearing protection Protective goggles or a visor Breathing mask Protective goggles or a visor must be worn. [. . . ] Cutting close to gas pipes always entails danger. Make sure that sparks are not caused when cutting in view of the risk of explosion. remain concentrated and focused on the task. Carelessness can result in serious personal injury or death. Make sure that no pipes or electrical cables are routed in the area to be cut. Check that electrical cables within the working area are not live. Never leave the machine unsupervised with the motor running. Always saw in a manner that permits easy access to the emergency stop. Make sure that there is always another person close at hand when you use the machines, so that you can call for help if an accident should occur. Do not use the machine in bad weather, such as dense fog, rain, strong wind, intense cold, etc. Working in bad weather is tiring and can lead to dangerous conditions, e. Ensure that the working area is sufficiently illuminated to create a safe working environment. Always ensure you have a safe and stable working position. You are handling heavy parts, which implies the risk of pinch injuries or other injuries. do not expose the machine to temperatures exceeding 45°C or to direct sunlight. Do not use the machine in wet or humid surroundings, close to water, in the rain or snow. Do not wash the machine with water, as water can enter the electrical system or the engine and cause damage to the machine or short circuit. Always switch of the power unit and pull out the electric cable before moving the equipment. Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. Store the machine and its equipment in a dry and frost proof place. If there is a risk of freezing, the machine must be drained of any remaining water coolant. PP 480 HF is supplied with the following equipment: 1 x power unit 1 x remote control 1 x power lead 1 x Canbus cable 1 x water hose Transport boxes for smooth transport. [. . . ] Check that the power lead is fitted correctly and that it is not OVER CURRENT Over current to saw motor damaged. The message can appear in case of a loose contact. Fault on HALL-sensor card for Take the equipment to an authorized service shop. Fault on HALL-sensor card for Take the equipment to an authorized service shop. [. . . ]