User manual I-CAN 1100T ICE

[. . . ] All Rights Reserved The product described in this manual is protected by national and international copyright laws. Any duplication of the software or hardware comprising the product is strictly prohibited. In addition, no part of this manual may be reproduced or transmitted, in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the prior written permission of the manufacturer. Disclaimer The manufacturer specifically disclaims all warranties, either express or implied, including but not limited to merchantability, accuracy, completeness, noninfringement or fitness for a particular purpose, with respect to the software, the accompanying product manual(s) and written materials, and any accompanying hardware. The manufacturer reserves the right to revise or make improvements to its product and related materials at any time and without obligation to notify any person of such revisions or improvements. [. . . ] To set a Reminder, when you are in the Channel Banner (e. g. Press either or button): to display information about the next program. When the program icon appears in the Channel Banner. information concerns the next program, the . Press the Reminder. button on your remote control to display the window where you can set a to set a Viewing Reminder . When the Setting a Reminder window is displayed, press or press to set a Recording Reminder. 4 1100T Black You can set a Reminder when the Channel Banner displays the information about the current channel or in the browsing mode. If you want to cancel a Reminder, you can do it in two ways: I 1. Display the information about the program for which the Reminder has been set (by pressing the / buttons when the Channel Banner is displayed) button to display the Canceling a Reminder window. button on your remote control to confirm the cancellation. . Open the Viewer Planner submenu under the Main Menu. Highlight the Reminder you want to cancel/delete. to confirm. To modify Reminders, go to Viewer Planner under the Main Menu. If the Receiver Lock option (Main Menu ­ For Parents) is set to Yes, you will be asked to enter the PIN code, if the program for which you want to set a Recording Reminder exceeds the Parental Level settings or is broadcast on a locked channel. When your decoder is in standby mode (the LED indicator on the front panel illuminates red), all the accepted Recording Timers and Reminders will be recorded. Setting a Reminder If you have set a Recording Reminder or Timer, don't forget to set your VCR as well. Please note that any screens displayed during recording will be recorded as well. Changing the volume level during the recording will also be audible on the recorded content. 5 1100T Black Channel Manager When you select Channel Manager from the Main Menu, you can define the content of individual channel lists as well as modify channels belonging to individual lists. The Modify option allows you to perform a number of operations relating to channels of the currently selected channel list. Within All TV list you can perform operations such as: Lock, Move, Skip, Rename, Hide and Restore Channels. Within your favorite lists you can perform operations such as: Add, Delete, Move, Skip, Rename and Lock Channels. Channel Manager Please note that when a selected list is empty, only the Add Channels option is active. Add Channels You can create up to 6 TV and up to 6 Radio lists with channels you watch most often and/or want to access easily. To add channels to your favorite lists, when you are in the Channel Manager menu, follow the procedure below: 1. Select Mode - TV if you want to add channels to your favorite TV list(s), or Radio if you want to add channels to your favorite Radio list(s). Select the favorite list to which you want to add channels. If the list already contains some channels, set the Add Channels Modify option to Add Channels and press to open the Add Channels window. [. . . ] Blocks appear in the picture on the screen. Your TV is blank or "snow" appears on the screen. · Check the connection between the decoder and VCR. · Make sure your VCR is set properly. Remedy Your decoder has lost some of its software settings. Switch your decoder off and switch it on again after a few seconds. [. . . ]