User manual I-CAN 1110SH TIV

[. . . ] All Rights Reserved The product described in this manual is protected by national and international copyright laws. Any duplication of the software or hardware comprising the product is strictly prohibited. In addition, no part of this manual may be reproduced or transmitted, in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the prior written permission of the manufacturer. Disclaimer The manufacturer specifically disclaims all warranties, either express or implied, including but not limited to merchantability, accuracy, completeness, noninfringement or fitness for a particular purpose, with respect to the software, the accompanying product manual(s) and written materials, and any accompanying hardware. The manufacturer reserves the right to revise or make improvements to its product and related materials at any time and without obligation to notify any person of such revisions or improvements. [. . . ] End Time: Set the time when you want the viewing or recording to end. Timer type: Choose whether you want to record (Recording) or view (Viewing) the broadcast content. Frequency: Choose how often you want a Timer to take place (once, daily or weekly). Once means that the Timer is defined only for one viewing or recording. Daily means that the timer is defined for each day from Monday to Friday. Weekly means that the Timer is set to occur once a week. In the Set a Timer window, by pressing items, and by pressing / / you move the highlight to particular Setting a Timer buttons you change the values of the highlighted items. For the Channel, Date and Start/End Time modification you can also use the number buttons on your remote control. When you set all the values, press . If the Receiver Lock option (Main Menu ­ For Parents) is set to Yes, you will be asked to enter the PIN code every time you set a Recording Timer. Setting a Reminder You can set a Reminder in the EPG and the Channel Banner. To set a Reminder, when you are in the Channel Banner (e. g. Press either or button): to display information about the next program. When the program icon appears in the Channel Banner. information concerns the next program, the . Press the Reminder. button on your remote control to display the window where you can set a to set a Viewing Reminder or . When the Setting a Reminder window is displayed, press press to set a Recording Reminder. 5 You can set a Reminder when the Channel Banner displays the information about the current channel or in the browsing mode. To set a Reminder when you are in the EPG (by pressing the 1. or button). to display information about one of next programs. button on your remote control to display the window where you can set a to set a Viewing Reminder or . When the Setting a Reminder window is displayed, press press to set a Recording Reminder. If you have set a Recording Reminder, using frequency and press the buttons to define recording button to confirm your settings. If you want to cancel a Reminder, you can do it in two ways: I 1. Display the information about the program for which the Reminder has been set (by pressing the / buttons when the Channel Banner is displayed). Press the button to display the Canceling a button on your remote control to Setting a Reminder If you have set a Recording Reminder or Timer, don't forget to set your VCR as well. Reminder window. Open the Viewer Planner submenu under the Main Menu. Highlight the Reminder you want to cancel/delete. to confirm. To modify Reminders, go to Viewer Planner under the Main Menu. [. . . ] · Switch your decoder off and switch it on again after a few seconds. · If the problem persists, contact your vendor. The signal is too weak or defective due to e. g. Try to adjust the position of your aerial or wait for the signal to be re-established. [. . . ]