User manual I-TECH ARROW II

[. . . ] A copy of the Declaration of Conformity can be found at: http://www. itechdynamic. com 16 i. Tech Arrow II Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Charging Your Headset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Normal Charging Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Ensure the headset is within a maximum of 10 metres of your mobile handset and there are no obstructions, such as walls or other electronic devices in between. If the above steps do not solve your problem, please recharge the headset and remove your mobile handset's battery for a while. The i. Tech Arrow II Headset is compliant with and adopts the Bluetooth Specification 1. 2. However, interoperability between the device and other Bluetooth-enabled products is not guaranteed because it depends on compatibility. For more information on the compatibility between the device with other Bluetooth-enabled products, please check with the manufacturer or browse http://www. itechdynamic. com 14 Charging Your Headset The Headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommendable to charge the battery fully. Charging Socket Charger Plug (Fig. 2) 3 3 Charging Your Headset Connect the charger to an AC wall outlet and the charger plug to the headset's charging socket (fig. 2). IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Normal Charging Time It takes about three hours to fully charge the battery. When the battery is fully charged, the LED will turn blue and remains on. Disconnect the charger from AC wall outlet and the headset. Press and hold the MFB (fig. 1) to turn the headset on, please refer to "Turning Your Headset On and Off" . Talk & Standby Time The fully charged battery offers up to 6 hours talk time and up to 200 hours standby time. When no calls are in progress, the headset remains turned on in standby mode. Low Battery When the headset is on and the battery becomes low, the status indicator flashes red and the headset emits a beep every 1 minute. Please recharge the battery as described above. 4 Safety Information · · · · · · · · Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while driving, ensure your attention and focus remains on the road. It is your responsibility to drive safely. Never allow children to play with the headset ­ small parts may be a choking hazard. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. Turn off your headset prior to boarding an aircraft. [. . . ] Headset pairing procedure is subject to different models of mobile handsets. 6 Adjusting the Volume Press the Volume Key repeatedly until you reach the desired volume level. Pairing Your Headset 1. Place the headset and the mobile handset where they are easily viewable and no more than 1 metre apart. 1) until the headset status indicator alternately flashes blue and red. Activate your mobile handset's Bluetooth function by referring to your mobile handset user guide for details. [. . . ]