User manual IBM THINKPAD 770Z Supplementary Guide

[. . . ] The FDD in the bay always takes precedence over the external FDD. For example, in suspend mode, if you install an FDD in the bay and attach an FDD externally, the computer recognizes the FDD in the bay after resuming. [. . . ] ­ If you use a SelectaDock III docking station, connect the power cord to the docking station. Notice for using the external monitor If you use the Both LCD and CRT Display function, the external monitor must support the same resolution as that of your ThinkPad LCD. If you are using an external monitor that does not support the maximum resolution of the ThinkPad LCD (1024 X 768 for the XGA model, or 800 X 600 for the SVGA model), do not use Both LCD and CRT Display. Notice for using the Compact Smart Card Some Compact Smart Cards are too thick to be inserted into the upper PC Card slot of your computer. Solving computer problems Docking station problems The following troubleshooting might apply to users who are using the docking station--SelectaDock I, II, III, or the Port Replicator with Advanced EtherJet Feature--under the Windows 95 environment. Note: In the following steps, src_cd is the drive letter of the DVD or CD-ROM drive and cc is the respective country code. The following table shows the country code that you will need in the instructions: Country Denmark Finland France Germany Code DK FI FR GR Country Italy Japan Netherlands Norway Code IT JP NL NO Country Spain Sweden United States Code SP SW US Problem PC Cards in the docking station cannot be recognized after you warm-dock your computer to the docking station. PC Card modems, SCSI cards, ATA cards, 3Com Combo Cards, or CardBus Cards in the docking station don't work after the computer resumes from the power management mode. The system reboots when you insert the PC Card into the docking station. Action 1. Insert the Software Selections CD into the CD-ROM drive. At the DOS prompt, type: COPY src_cd:\DATA\WIN95\cc\W95UPD\PCI. VXD C:\WINDOWS\SYSTEM and press Enter. You are prompted if it is okay to overwrite the file. Insert the Software Selections CD into the CD-ROM drive. [. . . ] patent numbers 4631603, 4577216, 4819098, 4907093, and other intellectual property rights. The use of Macrovision's copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view use only, unless otherwise authorized in writing by Macrovision. [. . . ]