User manual IBP MEDIPRO 100FN

[. . . ] This product must not be disposed of at the end of its normal service life in normal household waste, but must be handed over to a collection point suitable for the recycling of electrical and electronic equipment. the symbol printed on the product , the instruction manual or the packaging provides information on this. The recovered materials can be recycled in accordance with their labelling. You are playing an important part in the protection of our environment by participating in reusing, recycling or other forms of utilisation of old equipment. [. . . ] Avoid sports involving strength, do not try your limits!About blood pressure 3 Because it is changing, the blood pressure should always be measured at the same time of day, when your body is relaxed. It is the physician's responsibility to interpret the readings and analyze your physical condition. It is important that you consult your physician regularly. He will tell you your normal blood pressure and what you should take care of. Here are a few helpful tips to obtain accurate readings: - Wait one hour before measuring the blood pressure after a substantial meal. - Do not smoke or drink alcohol before measuring the blood pressure. - You should not do physical work one hour before taking a reading. Try to take 15 minutes rest before the reading. - Do not take measurements if you are under stress or tension. - Take the blood pressure reading at normal body temperature, not when you feel cold or hot. - When the monitor is stored at very low temperature (near freezing), keep it at a warm place at least for 1 hour before using it. - Wait about 5 minutes before making the next pressure measurement. Accessories included are instruction manual with warranty, batteries and keeping box (without ill. Memory icon The memory icon is displayed during save or memory display. Systolic pressure battery icon When this icon appears the batteries should be replaced. Diastolic pressure pulse icon The pulse icon appears when the pulse rate is displayed. The enclosed batteries must be fitted before use. The battery cover is on the bottom side of the unit. Ensure correct polarity according to the indication inside the compartment. Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery door. Replace all the batteries when the battery replacement sign appears on the LCD display, or when the LCD display is blank after you switch on the unit. [. . . ] A) Up to 90 measurements can be saved in the memory automatically. The values (blood pressure and pulse rate) can be saved in the memory of the unit. b) To read memory values , press the MEMORY key. The memory values will be shown on the LCD, together with the time and date. [. . . ]