User manual IBP MH901ICA

[. . . ] ) (Normally, the calibration reminder will appear after around 5, 000 times of use. When appears, please send the unit for calibration service. How " MH901iCA " Works This monitor uses trends-setting Technology to detect your blood pressure. [. . . ] The values are automatically stored in the pre-designated memory zone. Recall Values from Memory Press the "User-Switching key" to select a memory zone, and press the "M" key to switch from memory to memory with sequence numbers. Clear Values from Memory Press the "User-Switching key" to select a memory zone, then press and hold the "M" key for approximately 5 seconds to clear the data in the pre-designated memory zone. The data may be erased if any of the batteries is removed. (Suggest the users to first record the data on the blood Pressure log before replacing or moving away the batteries. To adjust the date/time in the monitor, press the Mode-Switching button to enter Time Adjustment, then press the Enter button. Each press will increase the number by one in a cycling manner. Press the Enter button again to confirm the entry, and the screen will show a blinking number representing the date. Change the date, the hour, and the minute as described in Step 2 above, using the M key to change and the Enter button to confirm the entries. A "0" will reappear as the unit is ready for measurement again. This unit is equipped with a reminder function, which signals with 3 short beeps at the selected time. Press the Mode-Switching button to enter BP Measurement Reminder Setting, then press Enter to switch from set to program (AL1 to AL4), then press M to designate the hour and minute to confirm the entry, then press to turn the unit off. (This function can also be used as an alarm clock. Personal Risk Category Setting The unit is equipped with a Personal Risk Category Setting function, which allows the user to set their own "normal" BP levels for each memory zone, based on the evaluation and suggestion of the physician. Press the Mode-Switching key to enter Personal Risk Category Setting. Then press Enter to switch from systolic pressure and diastolic pressure values to be set, and press M to adjust the value. [. . . ] Once the inflation reaches 300 mmHg, the unit will start deflating rapidly for safety reason. Do not dispose them together with the household garbage. Specifications Measurement Method Measurement Range Pressure Sensor Accuracy Inflation Deflation Memory capacity Auto-shut-off Operation Environment Storage Environment DC Power Source AC Power Source : Oscillometric : Pressure: 40~250mmHg; Pulse: 40~199 beats/ minute : Semi conductor : Pressure: ± 3mmHg; Pulse: ± 5% of reading : Pump Driven : Automatic Pressure Release Valve : 60 memories for each zone x 2 Zones : 1 minute after last button operation : Temperature: 10~40 (50~104); Humidity: 40%~85% RH max : Temperature: -10~60 (14~140); Humidity: 10%~90% RH max : 6V DC four R06 (AA) Batteries : 12V DC, 600mA, (Plug Size: outer(-) is 3. [. . . ]