User manual IBP TD 4313

[. . . ] for more details regarding tests , please see the user guide. IMPORTANT: The testing range can change with each new container of test strips. Always use the test range indicated on the label of the container you are currently using. Test results: Your blood glucose test results are shown in millimols of blood sugar per litre (mmol/l) or as milligrams of blood sugar per decilitre blood (mg/dl). [. . . ] Keep the test strips away from direct sunlight. Never transfer the test strips to another container. > When handling the test strips, always ensure your hands are completely dry. > Once a test strip has been removed from the container, it should be used immediately. Always reseal the container quickly after removing a new strip. > Never bend, cut or modify the test strips as this will lead to inaccuracies in results. Whenever the suction hole comes into contact with a drop of blood, this is filled automatically by means of a simple capillary effect. The blood is drawn to the suction hole and the glucose level is measured by the monitor. the results are then displayed on the device. Only a small amount of blood is required. When the code strip is entered into the monitor, its parameters are read automatically and the code number appears on the display. Before continuing, always check that the code displayed matches the one on the test strip container. Taking samples Always use the test strips with a fresh blood sample. Before taking a blood sample, we recommend you note the following procedure and also read through the blood glucose monitor handbook for optimum results. proceed in the following way to obtain a drop of blood: 1. Start by washing your hands as well as the intended pricking area. When using alcohol swabs, ensure pricking point is completely dry before taking a sample. You may in some cases need to massage or gently rub the relevant area to obtain the required amount of blood. Do not press on the pricking area with force. IMORTANT: Different pricking points can lead to different results. [. . . ] Always dispose of used test strips and lancets carefully (in household waste using an airtight container) in a way that will prevent injury to and infection of other parties. When using the device in a medical environment, dispose of the test strip and lancet using a suitable container according to regulations for potentially infectious materials. For more detailed descriptions and illustrations concerning both procedures, please consult the user guide. Accuracy: Whole blood glucose test results were compared with the YSI 2300 blood glucose analyser. [. . . ]