User manual ICOM CM-7G

[. . . ] Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc. The information contained in this user guide was written for Nokia model CM-7G phone. Nokia operates a policy of on-going development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL ICOM BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. [. . . ] You can also set a delay before forwarding takes place. Forward all fax calls­Forward all fax calls to a fax mailbox. Forward all data calls­Forward all data calls to a data mailbox. Cancel all call forwarding­Cancel any call forwarding options you may have set. 2 3 4 5 Scroll to the option of your choice and press Select. Scroll to the destination to which your calls will be forwarded (such as To other number) and press Select. Enter the number to which your calls, data, or other information will be forwarded and press OK. Your phone calls the network to activate the feature you have requested. The network sends a confirmation note when the feature has been activated successfully. [ 90 ] Menu functions CANCEL CALL FORWARDING · At the start screen, press Menu 4-2-2-8 (Settings > Call settings > Call forwarding > Cancel all call forwarding). Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details. Anykey answer Anykey answer allows you to answer an incoming call by briefly pressing any key except the power key, the left selection key, the right selection key, and the end key. 1 2 At the start screen, press Menu 4-2-3 (Settings > Call settings > Anykey answer). This feature is network-dependent and works on a call-by-call basis. Contact your wireless provider for more information. 1 At the start screen, press Menu 4-2-8 (Settings > Call settings > Send my caller identity). After a brief pause, Default, Yes, and No appear in the display. Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection. 2 Select a line for outgoing calls Note: This is a network-dependent feature. Check with your wireless provider for availability and a description of the feature. 1 At the start screen, press Menu 4-2-9 (Settings > Call settings > Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear in the display. Important: If you select Line 2 and have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line. [. . . ] For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. [. . . ]