User manual ICOM DS-100-02

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM DS-100-02. We hope that this ICOM DS-100-02 user guide will be useful to you.

Lastmanuals help download the user guide ICOM DS-100-02.


ICOM DS-100-02 : Download the complete user guide (687 Ko)

Manual abstract: user guide ICOM DS-100-02

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL DS-100 (#02) DSC CONTROLLER FOREWORD Thank you for purchasing this Icom product. The DS-100 (#02) DSC CONTROLLER is designed and built with Icom's superior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation. FEATURES Class D DSC terminal The DS-100 (#02) VHF DSC CONTROLLER is designed as a `Class D DSC terminal unit' for the IC-M401EURO or IC-M503 VHF MARINE TRANSCEIVERS. The plug of the control cable is a different type. IMPORTANT READ ALL INSTRUCTIONS pletely before using the controller. [. . . ] DS-100 SN10 · `Select a traffic CH' screen appears. DS100 SN2 DS100 SN3 <CLR Exit / ENT OK> I Distress call to ships General DSC calls may be used for communications after the Distress call, e. g. you want to change the operating mode, frequency, etc. I Individual call D Individual call to the coast station q Push [CALL], then push [] several times to select `Individual call' then push [ENT]. Then push [ENT]. (See page 18 for adding an address. ) e Push [Y]/[Z] to select your desired traffic channel from the list. r Push [CALL] and [ENT] simultaneously to transmit an Individual call. · Push [CLR] to stop the call. <Input address ID> ID:(9digit) e Select the coast station ID. e Push [CALL] and [ENT] simultaneously to transmit an Individual call. · Push [CLR] to stop the call. <CLR Exit / ENT OK> r `RCV Individual call--From: Coast stn', appears on the screen. 7 2 CALL PROCEDURE I Group call q Push [CALL], then push [] one or more times to select `Group call', then push [ENT]. w Select `manual entry' to enter 8 digit ID or push [] to select the desired ID address. Then push [ENT]. · `Select a traffic CH' screen appears. <Select a group> Manual entry ICOM I All ships call q Push [CALL], then push [] <Select a category> one or more times to select `All ships call', then push Safety [ENT]. e To select desired traffic <CLR Exit / ENT OK> channel push [BS] twice and enter channel number. * r Push [CALL] and [ENT] simultaneously to transmit an All ships call. · Push [CLR] to stop the call. <Input an address> ID:(8digit) 0 <CLR Exit / ENT OK> e Push [Y]/[Z] to select your desired traffic channel from the list. r Push [CALL] and [ENT] simultaneously to transmit an Individual call. · Push [CLR] to stop the call. * Traffic channel automatically defaults to channel 16. <CLR Exit / ENT OK> 8 CALL PROCEDURE 2 D When no acknowledgement is received When no acknowledgement is received the unit will beep every one second. In this case, the controller automatically transmits the distress call again every 3. 5 to 4. 5 minutes. · A distress relay call may be received after several minutes from another ship if acknowledgement cannot be received from a coast station directly. CAUTION: DO NOT push [CLR] while waiting for an acknowledgement, otherwise the distress call repeat will be cancelled, and a distress acknowledgement is automatically transmitted with your own MMSI. Use the [CLR] key only when you want to cancel repeated transmission. D After receiving an acknowledgement call The following should be commenced with your voice transmission after receiving a distress acknowledgement from a coast station (or another ship). · "MAY DAY" · "This is . . . . . . . . . (your ship name)" · The 9-digit identity AND the call sign (or other identification of the ship). · The ship's position if the DSC distress does not include it. · Any other information which might facilitate the rescue. 9 3 WHEN RECEIVING A DSC CALL I When receiving a Distress call When receiving a distress call, an alarm (Pi-po) sounds with max. And at the same time, the transceiver's (such as ICM401EURO or IC-M503) operating channel changes to CH 16 automatically. --RCV Distress call-- Distress ID: 23456789 Distress time & pos Time: UTC 12:34 Pos. : Lat 12°34'N Lon 123°45'W · Push [CLR] to cancel the alarm. · Monitor the communication between the calling ship and a coast station. When no communication is made, contact the ship using voice transmission on CH 16. 10 WHEN RECEIVING A DSC CALL 3 D When receiving an individual call When receiving an individual --RCV Individual call-- call, an alarm (Pi-pi) sounds. · Push [ENT], then the operFrom: JOHN ating channel changes to the designated channel. · Push [CLR] to record the received information, then <CLRExit/ ENTOK> the screen goes back to default. · The calling station transmits via voice on the designated channel. · When the individual ACK function is available When the individual acknowl<Select to comply> edgement function is available on your controller, push [ENT] Able to comply Unable to comply to turn to the <Select to comply> screen. [. . . ] w RECEIVE ANTENNA CONNECTOR Connects a marine VHF receiving antenna with a PL-259 plug for emergency frequency signal receiving. · Receiving frequency : 156. 525 MHz · Keep the emergency frequency signal receiving antenna away from the marine VHF antenna to avoid interference from the emitted RF signal. r GPS RECEIVER CONNECTOR Connects a GPS receiver (NMEA0183 ver. 2. 0) for sending position data without manual input. t EXTERNAL MICROPHONE CONNECTOR (IC-M503)* Connects to the optional HM-134 REMOTE-CONTROL MICROPHONE. y ANTENNA CONNECTOR (IC-M503)* Connects a marine VHF antenna with a PL-259 connector to the transceiver. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM DS-100-02

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM DS-100-02 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag