User manual ICOM F80S

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM F80S. We hope that this ICOM F80S user guide will be useful to you.

Lastmanuals help download the user guide ICOM F80S.


ICOM F80S : Download the complete user guide (1725 Ko)

Manual abstract: user guide ICOM F80S

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL UHF TRANSCEIVER iF70DT/DS iF70T/S iF80DT/DS iF80T/S VHF TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The photo shows the IC-F70DT/T or IC-F80DT/T. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. ABOUT APCO PROJECT 25 This device made under license under one or more of the following US patents: #4, 590, 473, #4, 636, 791, #5, 148, 482, #5, 185, 796, #5, 271, 017, #5, 377, 229. The IMBETM voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. [. . . ] w Push [CH Up] or [CH Down], or rotate [ROTARY SELECTOR]* to select a channel in sequence. *Depending on the pre-setting. 3 e When receiving a call, adjust the audio output level to a comfortable listening level. Transmitting: Wait for the channel to become clear to avoid interference. q Push [CALL] when initiating a call from your side. · Coded audio may be heard from the transceiver, then " " appears. · This operation may not be necessary depending on your signaling system. Ask your dealer for details. w Push the call key (assigned to one of the dealer programmable keys; except for the Digital mode operation) or [PTT]. e After transmitting, the remainder of your communication can be carried out in the normal fashion. Selective calling Non-selective calling w While pushing and holding [PTT], speak into the microphone at your normal voice level. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak into the microphone at a normal voice level. 13 3 BASIC OPERATION D TX code channel selection If the transceiver has [TX Code CH Select] assigned to it, the indication can be toggled between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed, [CH Up] or [CH Down] selects the TX code channel. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select]--a TX code channel number (or name) appears. e Push [Call] (or [PTT] during BIIS operation) to transmit the selected TX code. USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY: If the transceiver has a [TX Code CH Up] or [TX Code CH Down] key assignment, the programmed TX code channel can be selected directly when pushed. NOTE for PMR or BIIS PMR operation: · The LCD indication does not change when the operating channel number (or name) is displayed. (Depending on the pre-setting) · To check the selected TX code, push [TX Code CH Select]. D Transmitting notes · Transmit inhibit function The transceiver has several inhibit functions which restrict transmission under the following conditions: - The channel is in mute condition (`Inaudible' condition; " " does not appear. ) - The channel is busy. - Un-matched (or matched) CTCSS is received. (Depending on the pre-setting. ) - Un-matched (or matched) NAC is received. * (Depending on the pre-setting. ) - The selected channel is a `receive only' channel. · Time-out timer After continuous transmission for the pre-programmed time period, the time-out timer is activated, causing the transceiver to stop transmitting. · Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. 14 BASIC OPERATION D TX code number edit (PMR or BIIS PMR operation only) If the transceiver has [TX Code CH Select] or [TX Code Enter] assigned to it, TX code contents can be edited within the allowable digits. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select] to enter the TX code channel selection mode. · Select the desired channel before entering the TX code channel selection mode if necessary. 3 USING [TX CODE ENTER] KEY: q Select the desired TX code channel via [TX Code CH Select]+[CH Up] or [CH Down], [TX Code CH Up] or [TX Code CH Down]. e Push [TX Code Enter] to select the desired digit to be edited. · The digit to be edited blinks. 3 w Push and hold [TX Code CH Select] for 1 sec. e Push [TX Code CH Select] to select the desired digit to be edited. · The digit to be edited blinks. r Push [CH Up], [CH Down] or 10-keypad* to set the desired digit. The digit to the right will blink automatically. · When the 10-keypad* is used for setting, the digit to the right will blink automatically without pushing [TX Code CH Enter]. r Push [CH Up], [CH Down] or 10-keypad* to set the desired digit. The digit to the right will blink automatically. · When the 10-keypad* is used for setting, the digit to the right will blink automatically without pushing [TX Code CH Select]. y Repeat r and t to input all allowable digits. u Push [Call] or [PTT] to transmit the edited TX code. *IC-F70DT/T or IC-F80DT/T only y Repeat r and t to input all allowable digits. [. . . ] Please ask your dealer for details. Water protection cover VOX/PTT select switch 38 OPTIONS 9 VOX gain and delay adjustment q Attach the connector of the VS-1SC into the [SP/MIC] connector on the transceiver and tighten the screw. · Toggle the toggle switch to [VOX]. · VOX Delay The VOX delay time can be set from 0. 5 to 3. 0 sec. step) for a convenient interval before returning to receive. w Enter user set mode. 17) e Push [P0] several times to select the "VOX Gain" or "VOX Delay" items. · VOX Gain The VOX sensitivity level can be adjusted from OFF or 1 to 6 (more sensitive). [Up] Push [Down] SET X TXC SET X TXC 0. 5 sec (min. ) (default) 3. 0 sec (max. ) NOTE: MIC/VOX gain can be adjusted via the Adjusting pot using a thin screw driver. 9 [Up] Push [Down] SET X TXC SET X TXC VOX function is OFF VOX gain level 3 (default) 39 10 SAFETY TRAINING INFORMATION To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: C AU TIO N Your Icom radio generates RF electromagnetic energy during transmit mode. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM F80S

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM F80S will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag