User manual ICOM FP-601

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM FP-601. We hope that this ICOM FP-601 user guide will be useful to you.

Lastmanuals help download the user guide ICOM FP-601.


ICOM FP-601 : Download the complete user guide (10634 Ko)

Manual abstract: user guide ICOM FP-601

Detailed instructions for use are in the User's Guide.

[. . . ] Connecting the PD-200, a DGPS beacon receiver, to this system will permit the GPS to pinpoint the ship location more accurately. Please read this instruction manual carefully to ensure correct and efficient use of the product. Cartgraphy supplied by NAVIONICS Seamless chart start from $99 and span the globe with high detail and 16 zoom levels. Ask your nearest NAVIONICS dealer for more details. SUPPLIED ACCESSORIES Qty. q Self-tapping screws (M 6 × 30)········································4 w Spring washers (M 6) ······················································4 e Flat washers (M 6)···························································4 r Connector covers·····························································2 t Horse band (HAS-40) ······················································2 y Extention pipe (2273 PIPE) ·············································1 u GPS antenna ···································································1 i Power cable (OPC-786)···················································1 q Instruction manual q y w e u r t i Versions of the FP-561 which display "CE" on the serial number seal, comply with the essential requirements of the 89/336/EEC directive for Electromagnetic Compatibility. i TABLE OF CONTENTS INTRODUCTION . [. . . ] You will return to the previous screen. CLR SEL CANC SET SET 80. 0FT 31 r PLOTTER MODE q DATA COLOR SETTING 8 Ç Specifying the color of placenames 5 SCREEN SETTING DISP MODE BKG COLOR LAND SEA NAME D CON 5m D CON 10m D CON 20m LIGHT GRID DISP MAPS 1 BLUE YELL BLUE WHIT LBLU LBLU LBLU RED BLUE WHIT 2 CSLN OFF OFF OFF OFF OFF OFF OFF CLR ADJ CANC SET SEL SET 80. 0FT The color of place-names can be selected from among seven available colors. w Select "Screen Setting" using the [UP] or [DOWN] key and press the [SET] key. e Select "NAME" using the [UP] or [DOWN] key and press the [SET] key. t Select the desired color from among available colors (White (WHIT), Yellow (YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) using the [UP] or [DOWN] key and press the [SET] key. * When you select "OFF" and press the [SET] key, place-names are not displayed. y When you finish setting the color of place-names, press the [MENU] key. You will return to the previous screen. Î Specifying the color of depth contours 5 SCREEN SETTING DISP MODE BKG COLOR LAND SEA NAME D CON 5m D CON 10m D CON 20m LIGHT GRID DISP MAPS 1 BLUE YELL BLUE WHIT LBLU LBLU LBLU RED BLUE WHIT 2 CSLN OFF OFF OFF OFF OFF OFF OFF CLR ADJ CANC SET SEL SET 80. 0FT The color of depth contour can be selected from among seven available colors. w Select "Screen Setting" using the [UP] or [DOWN] key and press the [SET] key. e Select "D CON 5m, " "D CON=10m" or "D CON 20m" using the [UP] or [DOWN] key and press the [SET] key. t Select the desired color from among available colors (White (WHIT), Yellow (YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) using the [UP] or [DOWN] key and press the [SET] key. * When you select "OFF" and press the [SET] key, depth contour are not displayed. t When you finish selecting the positioning device, press the [MENU] key. You will return to the previous screen. 34 10 r PLOTTER MODE q CORRECTION OF SHIP POSITIONING ERROR (10)-1 Correcting a ship positioning error If the current ship position on screen differs from that on the nautical chart in latitude and/or longitude, you can correct such a ship positioning error with ease. There are two ways for positioning error correction: one using the cross hair cursor and the other with latitude/longitude entry. (10)-2 Correction using the cross hair cursor 5 POSITIONING MENU POS EQUIP GPS NMEA POS CORR GOTOCURSOR LAT N0. 000 LON E0. 000 AVERAGING 1 OFF DGPS# POSITIONING INFO# 0 10 20 30 40 CLR ADJ CANC SET SEL SET H 80. 0FT q On the coastline screen, press the [UP]/[DOWN] or [LEFT]/[RIGHT] key to activate the cross hair cursor. w On the coastline screen, use the [UP]/[DOWN] or [LEFT]/[RIGHT] key to move the cross hair cursor until its centerline coincides with the correct ship position. r Select "Positioning Menu" using the [UP] or [DOWN] key and press the [SET] key. t Select "POS CORR" (Position Correction) using the [UP] or [DOWN] key and press the [SET] key. "GOTOCURSOR" (Goto Cursor Position) is highlighted in yellow. The latitude/longitude readings of the system will be corrected so that they correspond to the current cursor position. You will return to the previous screen. (10)-3 Correction with latitude/longitude entry 5 POSITIONING MENU POS EQUIP GPS NMEA POS CORR GOTOCURSOR LAT N0. 001 LON E0. 000 AVERAGING 1 OFF DGPS# POSITIONING INFO# 0 10 20 30 40 CLR ADJ CANC SET SEL SET H 80. 0FT In this way of correction, the latitude/longitude of the current ship position can be corrected by up to 9. 999 minutes in 0. 001-minute increments. Orientation in latitude or longitude can also be changed from N (North) to S (South) or E (East) to W (West), and vice versa. w Select "Positioning Menu" using the [UP] or [DOWN] key and press the [SET] key. [. . . ] It is recommended not to use a TV during the use of the system. · Install on must Horse bands (supplied) NOTE: Be sure to screw tightly. · Install on a deck or roof 1 in (14 threads) Ratchet mount (Sold separately. Ask your boat dealer or marina. ) 71 INSTALLATION PROCEDURE 6 6-5 Installing an optional transducer Å Optional transducers and accessories Various types of transducers and ship speed/water temperature sensors are available as options to suit your application. EX-1010 EX-1622 RD-200 Through-the-hull type transducer (600W, 2 frequencies, metal enclosure, built-in sensor) Transom type transducer (600W, 2 frequencies, plastic enclosure, built-in sensor) DGPS beacon receiver i Installation position The performance of the fishfinder greatly depends on the installation position of the transducer. Transducers are mainly divided into two types: the through-the-hull type and the transom type. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM FP-601

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM FP-601 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag