User manual ICOM FP-601G

[. . . ] INSTRUCTION MANUAL MARINE PLOTTER/SOUNDER FP-561 COMBINE MARINEPLOTTER/SOUNDER fp-561 Information provided by this product includes are not legal Electronic charts navigation-aid data. Consult nautical consult current Always carry and charts in addition to the data when making a official charts frequently. decision on navigation. INTRODUCTION Thank you very much for purchasing the FP-561. The FP-561 is an advanced navigation and fishfinding system of compact design into which a marine navigator with a built-in GPS receiver and a fishfinder are integrated. [. . . ] y When you finish setting the color of place-names, press the [MENU] key. You will return to the previous screen. Î Specifying the color of depth contours 5 SCREEN SETTING DISP MODE BKG COLOR LAND SEA NAME D CON 5m D CON 10m D CON 20m LIGHT GRID DISP MAPS 1 BLUE YELL BLUE WHIT LBLU LBLU LBLU RED BLUE WHIT 2 CSLN OFF OFF OFF OFF OFF OFF OFF CLR ADJ CANC SET SEL SET 80. 0FT The color of depth contour can be selected from among seven available colors. w Select "Screen Setting" using the [UP] or [DOWN] key and press the [SET] key. e Select "D CON 5m, " "D CON=10m" or "D CON 20m" using the [UP] or [DOWN] key and press the [SET] key. (D CON=Depth Contour) The selected item turns blue. r Move to the color field using the [LEFT] or [RIGHT] key. The color field will be highlighted in yellow. t Select the desired color from among available colors (White (WHIT), Yellow (YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) using the [UP] or [DOWN] key and press the [SET] key. Depth contour will be displayed in the selected color. * When you select "OFF" and press the [SET] key, depth contour are not displayed. y When you finish setting the color of depth contour, press the [MENU] key. You will return to the previous screen. ´ Specifying the color of lights 5 SCREEN SETTING DISP MODE BKG COLOR LAND SEA NAME D CON 5m D CON 10m D CON 20m LIGHT GRID DISP MAPS 1 BLUE YELL BLUE WHIT LBLU LBLU LBLU RED BLUE WHIT 2 CSLN OFF OFF OFF OFF OFF OFF OFF CLR ADJ CANC SET SEL SET 80. 0FT The color of lights can be selected from among seven available colors. w Select "Plotter Menu" using the [UP] or [DOWN] key and press the [SET] key. e Select "LIGHT" using the [UP] or [DOWN] key and press the [SET] key. r Move to the color field using the [LEFT] or [RIGHT] key. The color field will be highlighted in yellow. t Select the desired color from among available colors (White (WHIT), Yellow (YELL), Light blue (LBLU), Purple (PURP), Red, Green (GREE), Blue) using the [UP] or [DOWN] key and press the [SET] key. Lights will be displayed in the selected color. * When you select "OFF" and press the [SET] key, lights are not displayed. y When you finish setting the color of lights, press the [MENU] key. You will return to the previous screen. 32 8 r PLOTTER MODE q DATA COLOR SETTING Ï Specifying the color of map border 5 SCREEN SETTING DISP MODE BKG COLOR LAND SEA NAME D CON 5m D CON 10m D CON 20m LIGHT GRID DISP MAPS 1 BLUE YELL BLUE WHIT LBLU LBLU LBLU RED BLUE WHIT 2 CSLN OFF OFF OFF OFF OFF OFF OFF CLR ADJ CANC SET SEL SET 80. 0FT The color of map border can be selected from among seven available colors. w Select "Screen Setting" using the [UP] or [DOWN] key and press the [SET] key. [. . . ] When sending positioning data obtained from the build-in GPS navigator to optional radar MR-61/610, Marine plotter VP-21 or other devices, plug these devices to the NMEA connector (3-pin/4-pin) on the rear panel of the system while referring to the overall connection diagram on page 70. NMEA connector on the rear panel NMEA IN + NMEA IN _ 1 2 4 3 NMEA OUT _ NMEA OUT + 6-7 DGPS The DGPS is a newly established system intended to improve the positioning precision of the GSP. Connecting RD-200, a DGPS beacon receiver, allows the system to receive correction data from a land DGPS reference station, thereby enabling the positioning precision to be further improved. The nominal positioning precision is 100 m when only the GPS is used, but using the DGPS leads to the nominal precision of 10 m. * For details, see the RD-200 Instruction Manual. 73 MAINTENANCE 7-1 Maintenance and inspection 7 This system is designed to be easy to maintain for the operator. [. . . ]