User manual ICOM HM-162E

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM HM-162E. We hope that this ICOM HM-162E user guide will be useful to you.

Lastmanuals help download the user guide ICOM HM-162E.

Download

Manual abstract: user guide ICOM HM-162E

Detailed instructions for use are in the User's Guide.

 [. . . ] INSTRUCTIONS REMOTE-CONTROL MICROPHONE

Thank you for purchasing the HM-162E REMOTETM CONTROL MICROPHONE. The COMMANDMIC III is a remote control microphone for use with the IC-M603 or else. Please read the connected transceiver's instruction manual carefully before installation and operation. These instructions are just described the remotecontrol operations only. 

HM-162E

These instructions are described when the HM-162E is connected to the IC-M603.  [. . . ]  While pushing [H/L],  rotate [SELECTOR] to adjust the backlight level. 
B · "BACKLIGHT " with the backlight level appears. · The backlight is adjustable in 7 levels and OFF. 
BUSY-25W---INT---CALL 25W---INT---CALL LOCAL--DUP SCRAM--TAG SCRAM--TAG NORMAL-SCAN BACKLIGHT -7 -<ENT OK> <ENTOK> COMMERCIAL

/7 Intercom operation
q Push [IC] to activate the Intercom function. w Push and hold [PTT] to talk. 
I · "INTERCOM TALK" appears. 
BUSY-25W---INT---CALL BUSY-25W---INT---CALL LOCAL--DUP SCRAM--TAG SCRAM--TAG NORMAL-SCAN INTERCOM TALK 123"23. 236W --UTC-10:10COMMERCIAL --UTC-10:10COMMERCIAL BUSY-25W---INT---CALL BUSY-25W---INT---CALL LOCAL--DUP SCRAM--TAG SCRAM--TAG NORMAL-SCAN INTERCOM LISTEN 123"23. 236W --UTC-10:10COMMERCIAL --UTC-10:10COMMERCIAL

e Release [PTT] to listen. 
I · "INTERCOM LISTEN " appears when the transceiver is in talking mode. · To adjust the audio outoput level,  push [VOL/SQL] then rotate [SELECTOR VOL]. 

Appears

/4 RX Speaker function
q Push [HAIL·RX ] for 1 sec. to enter the RX Speaker mode. 
BUSY-25W---INT---CALL BUSY 25W---INT---CALL LOCARX UP LOCARX--UP SCRAM--TAG SCRAM--TAG NORMAL-SCAN RXRX [CH-] [CH 154"34. 206N 154"34. 206N 123"23. 236W -<ENT OK>-- CALLING <ENTOK>--

r Push [IC] to cancel the Intercom function. 
· Pushing [16·C] also cancels the Intercom function. 

· " RX " indicator appears. · The audio output level for the RX speaker can be adjusted when entering this mode. Or while pushing [HAIL·RX ],  rotate [SELECTOR] before tuning this function OFF (within 1 sec. ). 

For your reference: In case the Intercom mode is selected with the transceiver while the microphone power is OFF,  the microphone power is automatically turned ON and the Intercom mode is selected. 

D Intercom beep function
 Push and hold [IC] for more than 1 sec. 
· Emits the Intercom beep while holding. 

w To cancel the RX Speaker mode,  repeat step q. 
· " RX " indicator disappears. 

/5 Hailer function
q Push [HAIL·RX ] to enter the hailer mode. w Push and hold [PTT] and speak at a normal voice level. 
BUSY-25W---INT---CALL LOCAL--DUP SCRAM--TAG NORMAL-SCAN HAILER LISTEN 15. 236W 15. 236W ____al--1:10--CALLING ___ l--1:10--CALLING

/8 Automatic foghorn
The automatic foghorn function sounds a horn repeatedly until the function is turned OFF. Four patterns are available for varying conditions. The foghorn outputs from the hailer speaker. To use this function,  the hailer speaker must be connected to the transceiver. See the transceiver's instruction manual for connection details. The audio frequency of the foghorn is selectable in Set mode. q While pushing and holding [H/L],  push [HAIL·RX ] to enter auto foghorn mode. w Rotate [SELECTOR] to select the desired foghorn pattern,  push [ENT]. 
U S S · `UNDERWAY, ' `STOP, ' `SAIL, ' T `TOW' are available. · Even if [ENT] hasn't been pushed,  the display automatically changes to the next step after 5 sec. of inactivity. 
BUSY-25W---INT---CALL BUSY-25W---INT---CALL LOCARX UP LOCARX--UP SCRAM--TAG SCRAM--TAG NORMAL-SCAN UNDERWAY UNDERWAY [VOL] -STOP4"34. 206N STOP4"34. 206N 123"23. 236W -<ENT OK>-- CALLING <ENTOK>--

T · "TALK" appears. W · "WAIT" appears while the transceiver side is in use. · To adjust the hailer level,  rotate [SELECTOR]. 

e After speaking,  release [PTT]. r To cancel the hailer mode,  repeat step q. 
· Pushing [16·C] also cancels the hailer function. 

While in the hailer mode,  the transceiver functions (transmit and receive) are interrupted. If the transceiver is in transmit condition,  the hailer function is not available. 

/6 AquaQuake water draining function (Available depending on the transceiver)
AquaQuake helps drain water away from the speaker housing (water that might otherwise muffle the sound coming from the speaker). The HM-162E emits a vibrating noise when this function is being used.  [. . . ] The messages can be used as an assistance to the logbook. R q Select and enter "Received Calls" in the DSC menu. D O w Select and enter "Distress" or "Other. " e Select and enter the desired message. 
· Messages which are blinking have not been read. 

D MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked. M q Select and enter "MMSI Check" in the set up menu.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM HM-162E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM HM-162E will begin.