User manual ICOM IC-125
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-125. We hope that this ICOM IC-125 user guide will be useful to you.
Lastmanuals help download the user guide ICOM IC-125.
Manual abstract: user guide ICOM IC-125
Detailed instructions for use are in the User's Guide.
[. . . ] NEVER operate the transceiver with a headset or other audio accessories at high volume levels. NEVER short the terminals of the battery pack.
DEFINITION Personal injury, fire hazard or electric shock RWARNING may occur. AVOID using or placing the transceiver in direct sunlight or
in areas with temperatures below +22°F (30°C) or above +140°F (+60°C). The basic operations, transmission and reception of the transceiver are guaranteed within the specified operating temperature range. [. . . ] After pushing [Digital] or [TX Code CH Select], selects call list or TX code channel, respectively. [MONITOR]; Moni(Audi): Push this key after the communication to send a `Clear down' signal during MSK channel operation. [P2]/[RED]; Null : No function is assigned.
Appears or blinks
w Push and hold [PTT], then speak into the microphone at a normal voice level.
·" ·" " indicator appears. " appears while receiving a signal.
e Release [PTT] to return to receive. r To finish the conversation, push [MONITOR] (Moni(Audi)) to send the `Clear down' signal.
· Either station can send a `Clear down' signal. · " " disappears and the transceiver returns to the standby condition.
D Group call
q When a group call is received;
· Beeps sound. · The programmed text message (e. g. " ") and the calling station ID (or text) is displayed alternately, depending on the setting. · " " appears or blinks depending on the setting.
D Displaying the received call record -- Queue indication
The transceiver memorizes the calling station IDs for record. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once the transceiver is powered OFF, the all records are cleared. q Push [P1] (Digital) for 1 sec.
· Displays following indication.
When a record is available
Appears or blinks
When no record is available
w Push and hold [PTT], then speak into the microphone at a normal voice level. · Push [Status Up]/[Status Down] to scroll the message manually.
r Push [P1] (Digital) for 1 sec. again to return to the standby condition.
· When no operation is performed for 30 sec. , the transceiver returns to the standby condition automatically.
w Push [P1] (Digital) momentarily.
· Displays message memory.
When a message is available
When no message is available
I Transmitting a status
The status message can be selected with the programmed text, and the message text is also displayed on the function display of the called station. Up to 24 status types (1 to 24) are available, and the status messages 22 and 24 have designated meanings. Status 22: Emergency* Status 24: GPS request
*The status 22 can also be used as a normal status message by disabling the designated meaning. However, the status 24 is fixed.
D Transmitting a status
q While in the standby condition, push [P1] (Digital), then push [UP] or [DOWN] to select the desired station/group code. w Push [P1] (Digital) again, then push [UP] or [DOWN] to select the desired status message. Or, you can select the desired status message using [Status Up]/[Status Down] key directly.
The status call can be sent with both individual and group calls.
Status message is displayed.
e Push [P0] (Call) or [PTT]* to transmit the status message to the selected station/group.
*PTT call can be made only when PTT call capability is permitted. · 2 beeps will sound and the transceiver returns to the standby condition automatically when the transmission is successful.
I Transmitting an SDM
The short data message, SDM, can be sent to an individual station or group stations. Also, 8 SDM memory channels are available and the messages can be edited via PC programming.
D Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then push [UP] or [DOWN] to select the desired station/group code. w Push [P1] (Digital) again, then push [UP] or [DOWN] to select the desired SDM. Or, you can select the desired SDM using [Status Up]/[Status Down] key directly.
SDM is displayed.
e Push [P0] (Call) or [PTT]* to transmit the SDM to the selected station/group.
*PTT call can be made only when PTT call capability is permitted. [. . . ] 46
OPTIONS D DC CABLES
· CP-17L CIGARETTE LIGHTER CABLE Allows charging of the battery pack through a 12 V cigarette lighter socket. (For BC-119N) · OPC-515L/OPC-656 DC POWER CABLES Allows charging of the battery pack using a 13. 8 V power source instead of the AC adapter. OPC-515L: For BC-119N OPC-656 : For BC-121N
D OTHER OPTIONS
· SP-13 EARPHONE Provides clear receive audio in noisy environment. · HM-131L SPEAKER-MICROPHONE Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-125
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-125 will begin.