User manual ICOM IC-2SRE

[. . . ] q Hand microphone (HM-151) . . . . . . . . . . . . . . . . . . . . . . . . 1 w DC power cable* (OPC-1457) . . . . . . . . . . . . . . . . . . . . . 1 e Spare fuse (ATC 5 A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 r Spare fuse (ATC 30 A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] to toggle between RTTY and RTTY-R modes. RTTY mark frequency is set to 2125 Hz. (default) 2125, 1615 and 1275 Hz are available. w Push [AF(SET)] momentarily to enter the set mode menu. e Push [F-1 QS] to enter the quick set mode. R r Push [F-1 Y] or [F-2 Z] to select "RTTY Mark Frequency. " t Rotate [DIAL] to select the desired frequency. · Push and hold [F-4 DEF] for 1 sec. to select the default frequency. 4 RTTY shift width is set to 170 Hz. (default) 170/200/425 Hz are available. Shift width q Enter the quick set mode as above. R w Push [F-1 Y] or [F-2 Z] to select "RTTY Shift Width. " e Rotate [DIAL] to select the desired shift width. · Push and hold [F-4 DEF] for 1 sec. to select the default shift width. RTTY keying is set to `normal'. (default) normal : key open=mark key close=space reverse: key open=space key close=mark RTTY keying polarity q Enter the quick set mode as above. R w Push [F-1 Y] or [F-2 Z] to select "RTTY key ing Polarity. " e Rotate [DIAL] to select the desired keying polarity. · Push and hold [F-4 DEF] for 1 sec. to select the default polarity. Z After Pre-setting is finished, push [Z(MENU/GRP)] twice to return the normal operating mode. 56 4 RECEIVE AND TRANSMIT Operating AM Z Y q Push [Y(BAND)]/[Z(BAND)] to select the desired band or push a band key on the HM-151. 82) S While "S-1" is selected, push [F-4 VSC] to turn the VSC function ON and OFF. ·" " appears when VSC function is set to ON. Push and hold [MNF/ADJ] for 1 sec. to enter the manual notch filter set mode. · Push [F-2 NF1], [F-3 NF2] to select the notch filter, push [F-4 NW] to set the filter width, rotate [DIAL] to set the notch frequency. 4 D Convenient functions for transmit · Transmit quality monitor (p. 87) Push [AF(SET)], then [F-4 OTH] to enter the miscellaneous (others) set mode. Select an item with [F-1 ]/[F-2 ], then rotate [DIAL] to turn the monitor function ON and OFF. · VOX (voice operated transmit) (p. 83) M While "M-3" is selected, push [F-1 VOX] to turn the VOX function ON and OFF. · Push and hold [MENU/GRP] for 1 sec. once or twice to select the menu group M. · Push [MENU/GRP] momentarily one or more times to select the menu M-3. ·" " appears when the VOX function is set to ON. M While "M-3" is selected, push and hold [F-1 VOX] for 1 sec. to enter the VOX set mode. · Push [F-1 ]/[F-2 ] to select an item. · Rotate [DIAL] to set the value/conditions. 58 4 RECEIVE AND TRANSMIT Operating FM Y Z q Push [Y(BAND)]/[Z(BAND)] to select the desired band or push a band key on the HM-151. [. . . ] Has automatic tuning and band selection capability. Full break-in (QSK) operation is possible. The amplifier/power supply unit and the remote control unit are separated. An optional OPC-599 is required for connection. 19 150 20 MENU GUIDE Main menu group M-1 SPL A/B FIL XFC M-2 MEM MW MCL V/M M-3 VOX COM AGC TBW (SSB) BRK 1/4 AGC 1/4 AGC VOX AGC (CW) (RTTY) (AM) Sub menu group S-1 VO MET VSC (SSB/AM) (CW) VO KEY MET VSC (RTTY) VO DEC MET VSC VO DTM MET VSC (FM/WFM) S-2 SCN PRI V/M VSC SEL (in memory mode) VOX DUP TON 9600 (FM/WFM) S-3 MW MPW MPR G-1 BAND scope Multi function meter G-2 G-3 BAND scope Multi function meter SWR meter Graphic menu group Push [AF] momentarily Push momentarily Push for 1 sec. Push [Z(MENU/GRP)] to exit Set mode menu 151 MENU GUIDE 20 Set mode description · Set mode menu · Miscellaneous (others) set mode Push [Z(MENU/GRP)] or [AF] switch to return to upper menu · Display set mode · Time set mode Quick set mode No. [. . . ]