User manual ICOM IC-40G

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-40G. We hope that this ICOM IC-40G user guide will be useful to you.

Lastmanuals help download the user guide ICOM IC-40G.

Download

Manual abstract: user guide ICOM IC-40G

Detailed instructions for use are in the User's Guide.

 [. . . ] 20) In addition,  a manual transponder is also available for "GROUP MODE" operation to check availability of stations in a specified group within the operating range. In this case,  the transceiver alerts you via beeps. 12)

i

I WATER-RESISTANT* CONSTRUCTION
Water-resistant* construction is employed,  and this unit can be used in a wide range of applications. *Meets JIS water-protection specification grade 4. 

I GROUP MODE (BUILT-IN CTCSS: Continuous Tone
Coded Squelch System)
CTCSS encoder/decoder are standard,  providing quiet stand-by.  [. . . ] t LOW BATTERY INDICATOR Appears or blinks when the battery decreases to a specified level. y GROUP NUMBER INDICATOR Indicates the selected group number during the group function ON. u CHANNEL NUMBER INDICATOR Indicates the selected operating channel number. i POWER ON INDICATOR Appears while the power is ON. o ANSWER BACK INDICATOR  Appears when you and your group are in the conversation area.  Blinks when you or your group is out of the conversation area. !0 TRANSMIT INDICATOR Appears during PTT ON. 
4

BATTERY CHARGING
I Battery caution
CAUTION NEVER short the terminals. NEVER mix old and new batteries. 

3
2 3

NEVER incinerate used battery cells. Internal battery gas may cause explosion. Make sure all battery cells are the same brand,  type and capacity. AVOID over charging-- The BP-202 can be charged during operation when the AC adapter or the optional cigarette lighter cable is connected. This is useful to listen to weak signals that do not open the squelch. 
8

BASIC OPERATION

4

I Selecting the operating channel
Push [Y] or [Z] keys several times until the desired operating channel number appears on the display. · While pushing and holding [Y] or [Z] keys,  the displayed channel changes continuously until channel number "1" appears. First of all,  set the same group code number for all group member's transceivers. To turn ON the group mode operation: q Push [MODE] to enter set mode. 
· "- - -" (group mode OFF) appears on the display. 

6

GROUP MODE (CTCSS)

w Push [Y] or [Z] to select the de- [MODE] sired code number. [Y] e Push [MODE] twice to set the group code number and exit set [Z] mode. To cancel the group mode operation: q Push [MODE] to enter set mode. 
· Channel number disappears on the display. 

w Push [Y] or [Z] to select "- - -" (group mode OFF). e Push [MODE] twice to cancel the group mode and return to operating condition. 

NOTE: Only stations with the same group channel number can be heard during group mode operation,  even when the busy indicator appears on the display. 
12

GROUP MODE (CTCSS)

6

D CTCSS code table
CH 01 02 03 04 05 06 07 08 09 10 Freq. 67. 0 71. 9 74. 4 77. 0 79. 7 82. 5 85. 4 88. 5 91. 5 94. 8 CH 11 12 13 14 15 16 17 18 19 20 Freq. 97. 4 100. 0 103. 5 107. 2 110. 9 114. 8 118. 8 123. 0 127. 3 131. 8 CH 21 22 23 24 25 26 27 28 29 30 Freq. 136. 5 141. 3 146. 2 151. 4 156. 7 162. 2 167. 9 173. 8 179. 9 186. 2 CH 31 32 33 34 35 36 37 38 --Freq. 192. 8 203. 5 210. 7 218. 1 225. 7 233. 6 241. 8 250. 3 OFF (unit: Hz)

6

 What is CTCSS (Continuous Tone Coded Squelch System) GROUP MODE ? [. . . ] connector : Less than 500 mW ERP : ±2. 5 kHz : Less than ­40 dB : 3-conductor 2. 5 (d) mm/2. 2 k

RECEIVER
· Receiver system : Double-conversion superheterodyne · Sensitivity (12 dB SINAD) : Less than 0. 2 µV · Selectivity : More than 8. 5 kHz/­6 dB · Spurious & image rejection: More than 40 dB · Adjacent Ch. rejection : More than 40 dB · Intermodulation rejection : More than 40 dB · Audio output power : More than 100 mW at 10 % distortion (at 4. 5 V DC) with an 8  load · Ext. speaker connector : 3-conductor 3. 5 (d) mm/8 

All stated specifications are subject to change without notice or obligation. 

22

SPECIFICATIONS

10

D Channel number and group number
Use this page to record a group operating channel number (see p. 12) for your reference. 

Operating channel number Group code number

ï Channel frequency list
CH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Freq. (MHz) 462. 5625 462. 5875 462. 6125 462. 6375 462. 6625 462. 6875 462. 7125 467. 5625 467. 5875 467. 6125 467. 6375 467. 6625 467. 6875 467. 7125

10

23

11 OPTIONS
BP-202 Ni-Cd BATTERY PACK 3. 6V/700 mAh Ni-Cd battery pack.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-40G

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-40G will begin.