User manual ICOM IC-F1610
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-F1610. We hope that this ICOM IC-F1610 user guide will be useful to you.
Lastmanuals help download the user guide ICOM IC-F1610.
You may also download the following manuals related to this product:
ICOM IC-F1610 BROCHURE (609 ko)
ICOM IC-F1610 BROCHURE 2 (594 ko)
Manual abstract: user guide ICOM IC-F1610
Detailed instructions for use are in the User's Guide.
[. . . ] AVOID placing the transceiver is excessively dusty environments.
AVOID placing the transceiver against walls. This will obstruct heat dissipation.
AVOID the use of chemical agents such as benzine or alcohol when cleaning, as they can damage the transceiver's surfaces.
BE CAREFUL!The transceiver will become hot when
operating continuously for long periods.
TABLE OF CONTENTS
IMPORTANT . 17 iv
q w e r
t y u i o !0 !1 !2 !3
q Microphone (HM-100) . [. . . ] · The emergency call is transmitted one time only or repeatedly until receiving a control code, depending on the pre-settting.
D Programmable functions without supplied stickers
TX CODE CHANNEL UP/DOWN KEY Push to select a TX code channel directly. CHANNEL UP/DOWN FUNCTION When a key is assigned this function, push it to increment or decrement the operating channel. CHANNEL SELECT FUNCTION When a key is assigned this function, push it to increment or decrement the operating channel. BANK UP/DOWN FUNCTION When a key is assigned this function, push it to increment or decrement the selected channel bank. PRIORITY CHANNEL A REWRITE FUNCTION When a key is assigned this function: Push momentarily to select PRIO A channel. DTMF RE-DIAL FUNCTION When a key is assigned this function, push it to automatically re-dial the most recent (manually transmitted) DTMF code.
TX CODE KEY Selects a transmit 5-tone code (station code) chanCODE nel.
· Push and hold to change the contents of the station code using the [CH UP]/[CH DN] keys. · Push to select a TX 5-tone code channel using the [CH UP]/[CH DN] keys after pushing this key.
ID MEMORY READ KEY ID MR Recalls detected ID codes.
· Push this key, then push [CH UP]/[CH DN] for selection. · Up to 5 ID's are remembered.
Push and hold this key to erase all memorized ID's. OPT OPTION KEY
TRUNKING GROUP KEY Push to select a trunking group (when operating in GRP SmarTrunk IITM mode). 5
TX CODE CHANNEL UP/DOWN FUNCTION When a key is assigned this function, push it to increment or decrement the TX code channel. TURBO SpeeDial A/B/C/D FUNCTIONS During SmarTrunk IITM operation, when a key is assigned this function, push it to automatically dial a commonly used number with one push.
CH09 173. 9 W LOW
output. u ACTIVATED KEY INDICATOR Appears or flashes to indicate the key directly below it has been activated. · Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer.
I Receiving and transmitting
RECEIVING: Push [ ] to turn power ON. When receiving a call, adjust the volume to comfortable listening level. TRANSMITTING: Lift the microphone off the microphone hanger.
· 5-tone mute may be released (the `audible' condition is selected and "[ ]" appears. · A priority channel may be selected automatically.
Wait for the channel to become clear.
· The channel is busy when "[ ]" appears.
Push the [CALL] key when initiating a call from your side.
· Coded audio may be heard from the transceiver, then "[ ]" appears. · This step may not be necessary depending on your signalling system. Ask your system operator or dealer.
While pushing and holding [PTT], speak into the microphone at your normal voice level.
Release [PTT] to receive.
IMPORTANT: To maximize the readability of your signal: · Pause briefly after pushing [PTT]. · Hold the microphone 15 to 20 cm from your mouth, then speak into the microphone at a normal voice level. 8
OPERATION D Tx code channel selection
If the transceiver has the [TX CH] key, display can be toggled with the operating channel number (or name) and Tx code channel number (or name). [. . . ] You do not have to answer a group call to hear it over the air.
OPTIONAL SmarTrunk IITM OPERATION D Terminating a call
After completing a call, push [#] to disconnect (hang up). IMPORTANT: If one person in the conversation terminates a call, all participants will be cut off.
D Programming memory speed dial
Push and hold [M] until you hear a high-pitched beep. Enter the memory location (09, A, B, C, D), the telephone
or subscriber number, then , [M] (or , [M] if for another system subscriber).
· A high-pitched beep indicates successful programming. · Memories [A][D] are used for Turbo SpeeDial.
D Last number redial
Push [M], [M] to automatically redial the last number called.
· A high-pitched beep indicates that the number is accepted.
D System busy indication
If all calls are busy, three low beeps sound after you initiate a call. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-F1610
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-F1610 will begin.