User manual ICOM IC-F24S INSTRUCTION MANUAL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-F24S. We hope that this ICOM IC-F24S user guide will be useful to you.
Lastmanuals help download the user guide ICOM IC-F24S.
Manual abstract: user guide ICOM IC-F24SINSTRUCTION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] INSTRUCTION MANUAL
This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
SAFETY TRAINING INFORMATION
Your Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as "Occupational Use Only", meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazW ARN ING ards. This radio is NOT intended for use by the "General Population" in an uncontrolled environment. [. . . ] w Pinch the clip (q), and slide the belt clip in the direction of the arrow (w). w q
I Front, top and side panels
IC-F14/F24 e LED INDICATOR (p. Lights/blinks orange when the matched 2/5-tone code is received, according to the pre-programming. r SPEAKER-MICROPHONE CONNECTOR [SP MIC] Connects the optional speaker-microphone. 31)
w e Speaker
[SP MIC] jack cover NOTE: Attach the [SP MIC] jack cover when the optional speaker-microphone is not used. 4) t DEALER-PROGRAMMABLE KEY [Lower] The desired function can be assigned by your dealer. u DEALER-PROGRAMMABLE KEY [Upper] The desired function can be assigned by your dealer. 9) i ANTENNA CONNECTOR Connects the supplied antenna.
q CHANNEL SW/SELECTOR · IC-F14S/F24S: Toggle the channel switch to select the pre-programmed channel 1 or 2. · IC-F14/F24 : Rotate the channel selector to select the preprogrammed memory channels. w VOLUME CONTROL [VOL] Rotate to turn the power ON/OFF and adjust the audio level.
D Programmable key reference
` LED indicator
The LED indicator indicates several information as follows; (Ref. ; R=Red, G=Green, O=Orange)
` Programmable function keys
The following functions can be assigned to [Upper] and [Lower] programmable function keys. Consult your Icom dealer or system operator for details concerning your transceivers programming. · Push after the communication is finished to send a `reset code'.
DTMF AUTODIAL KEY Push to transmit the programmed DTMF code. CALL KEYS Push to transmit a 2/5-tone code.
· Call transmission is necessary before you call another station depending on your signalling system. · [Call A] and/or [Call B] keys may be available when your system employs selective `Individual/Group' calls. Ask your dealer which call is assigned to each key.
NOTE: The un-mute condition (`Audible' condition) may automatically return to the mute condition (`Inaudible` condition) after a specified period. LOCK KEY Push and hold to electronically lock all programmable keys except the following: [Call] (incl. OUTPUT POWER SELECTION KEY Select the transmit output power temporarily or permanently, depending on the pre-setting.
· Ask your dealer for the output power level for each selection.
EMERGENCY KEYS Push and hold to transmit an emergency call. When [Emergency Single (Silent)] or [Emergency Repeat (Silent)] is pushed, an emergency call is transmitted without a beep emission.
· If you want to cancel the emergency call, push (or push and hold) the key again before transmitting the call. · The emergency call is transmitted one time only or repeatedly until receiving a control code depending on the pre-setting.
VOICE SCRAMBLER FUNCTION KEYS Push to turn the voice scrambler function OFF. This function can be used for situations other than an emergency alert such as a security alarm for example.
TALK AROUND KEY Push to turn the talk around function OFF. Push and hold to turn the talk around function ON.
· The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY Push to select the IF bandwidth to wide.
· The wide passband width can be selected from 25. 0 or 20. 0 kHz using the CS-F14 CLONING SOFTWARE. (PMR operation only) Ask your dealer for details.
Push and hold to select the IF bandwidth to narrow.
I Call procedure
I Turning power ON
Rotate [VOL] to turn power ON.
When your system employs tone signalling (excluding CTCSS and DTCS), the call procedure may be necessary prior to voice transmission. [. . . ] · An AC adapter (BC-124) or the DC power cable (OPC-656)
BP-231 BP-231 AC adapter (Not supplied with some versions. ) AC adapter (Purchase separately) AD-106 charger adapters are installed in each slot.
AD-106 charger adapter is installed in BC-119N.
Optional OPC-515L (for 13. 8 V power source) or CP-17L (for 12 V cigarette lighter socket) can be used instead of the AC adapter.
IMPORTANT!: Ensure the guide lobs on the battery pack are correctly aligned with the guide rails inside the charger adapter. Guide rails
DC power cable (OPC-656) (Connect with the DC power supply; 13. 8 V/at least 7 A)
IMPORTANT!: Ensure the guide lobs on the battery pack are correctly aligned with the guide rails inside the charger adapter.
SWIVEL BELT CLIP
SWIVEL BELT CLIP
I MB-93 contents
Qty. q Belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 w Base clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-F24S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-F24S will begin.