User manual ICOM IC-F3162T

[. . . ] INSTRUCTION MANUAL VHF TRANSCEIVER iF3162T/S iF3162DT/DS UHF TRANSCEIVER iF4162T/S iF4162DT/DS The photo shows the 10-key version UHF transceiver. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. instruction manual contains important operating instructions for the IC-F3162T, IC-F3162S, IC-F3162DT and IC-F3162DS VHF TRANSCEIVERS and IC-F4162T, IC-F4162S, ICF4162DT and IC-F4162DS UHF TRANSCEIVERS. See the operating guide for details of BIIS, MDC, LTR ® and Digital system operations. Ask your dealer for details. EXPLICIT DEFENITIONS WORD RDANGER RWARNING CAUTION NOTE DEFINITION Personal death, serious injury or an explosion may occur. [. . . ] When the TX code channel number (or name) is displayed, [CH Up] or [CH Down] selects the TX code channel. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select]-- a TX code channel number (or name) appears. w Push [CH Up] or [CH Down] to select the desired TX code channel. e After selecting, push [TX Code CH Select] to set. · Return to the stand-by mode. - The selected channel is a `receive only' channel. · Time-out timer After continuous transmission for the pre-programmed time period, the time-out timer starts, causing the transceiver to stop transmitting. · Penalty timer Once the time-out timer starts, transmission is further inhibited for a period determined by the penalty timer. r Push [Call] to transmit the selected TX code. USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY: If the transceiver has a [TX Code CH Up] or [TX Code CH Down] key assignment, the programmed TX code channel can be selected directly when pushed. 14 3 BASIC OPERATION D TX code number edit (PMR operation only) If the transceiver has [TX Code CH Select] or [TX Code Enter] assigned to it, TX code contents can be edited within the allowable digits. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select] to enter the TX code channel selection mode. · Select the desired operating channel before entering the TX code channel selection mode if necessary. USING [TX CODE ENTER] KEY: q After pushing [TX Code CH Select], push [CH Up] or [CH Down], or push [TX Code CH Up] or [TX Code CH Down] to select the desired TX code channel. w Push [TX Code Enter] to enter the TX code edit mode. · The digit to be edited blinks. w Push [TX Code CH Select] for 1 sec. to enter the TX code edit mode. · The digit to be edited blinks. e Push [TX Code CH Select] to select the desired digit to be edited. r Push [CH Up]/[CH Down] to select the desired digit. The digit to the right will blink automatically. y Repeat r and t to edit all allowable digits. u After editing, push [TX Code CH Select] to set. · Return to the stand-by mode. e Push [TX Code Enter] to select the desired digit to be edited. r Push [CH Up]/[CH Down] to select the desired digit. The digit to the right will blink automatically. y Repeat r and t to edit all allowable digits. u After editing, push [TX Code Enter] to set. · Return to the stand-by mode. i Push [Call] to transmit. D DTMF transmission If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. q Push [DTMF Autodial]-- a DTMF channel appears. w Push [CH Up] or [CH Down] to select the desired DTMF channel. e Push [DTMF Autodial] to transmit the DTMF code. i Push [Call] to transmit. 15 BASIC OPERATION 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 User set mode User set mode is accessed at power ON and allows you to set seldom-changed settings. You can "customize" the transceiver operation to suit your preferences and operating style. [. . . ] · AD-52 earphone adapter Provides clear receive audio in noisy environment. · HM-131SC/HM-159SC speaker-microphone Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. · HM-169 speaker-microphone Rugged type speaker-microphone. · HM-170GP speaker-microphone GPS speaker-microphone for BIIS mode operation. [. . . ]