User manual ICOM IC-F4TR

[. . . ] only CAUTION: changes or modifications to this transceiver, not expressly approved by icom inc. , could void your authority to operate this transceiver under fcc regulations. · HM-46/HM-54/HM-75A SPEAKER-MICROPHONES Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt clip. · BC-119 DESKTOP CHARGER + AD-81 CHARGER ADAPTER Used for rapid charging of battery packs. An AC adapter is supplied with the chargers (depending on version). [. . . ] NEVER short terminals of the battery pack or battery case. Also, current may flow into nearby metal objects so be careful when placing battery packs in handbags, etc. If your battery pack seems to have no capacity even after being charged, completely discharge it by leaving the power ON overnight. Then, fully charge the battery pack again. If the battery pack still does not retain a charge (or very little), a new battery pack must be purchased. q w e r MULT I-CHA RGER t y u i D Recycling information (U. S. A. only) The product that you have purchased contains a rechargeable battery. At the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for battery recycling options in your area or contact your dealer. BC-121 + AD-81 (6 pcs. ) AC adapter, BC-124 (purchased separately) BC-119 + AD-81 D BELT CLIP Attach the belt clip to the transceiver as illustrated below. Attach the belt-clip Release the belt-clip o q ANTENNA CONNECTOR Connects the supplied antenna. w VOLUME CONTROL [VOL] Turns power ON and adjusts the audio level. e [SP]/[MIC] JACK Connect optional speaker-microphone, or headset. r PTT SWITCH [PTT] Transmits during push; receives during release. t ACTIVITY LED Lights red while transmitting. y FUNCTION DISPLAY Displays the preset user information. u CHANNEL UP/DOWN KEYS [Y]/[Z] Push either switch to change the operating channel. i DEALER PROGRAMMABLE KEYS [P0]/[P1]/[P2]/[P3]/[A]*/[B]*/[C]*/[D]*/[]*/[­] Can each be programmed for one of several functions by your Icom dealer or system operator. D Programmable key reference. [­] [P0] [P1] [P2] [P3] *10-keypad type only. [. . . ] (Depend on pre-setting. ) · Then the LCD shows user information. (depending on pre-setting). When installing dry or alkaline cells: · Never connect DC power to the transceiver. Such a connection always charges the installed batteries and will damage the transceiver. D LOW BATTERY INDICATION - When appears, battery capacity is becoming low and transmitting is impossible. - When flashes, battery capacity is nearly exhausted. NOTE: If the power-up alert tone does not sound or a channel number does not appear on the display, turn the transceiver OFF, check the battery, then turn the transceiver back ON. [. . . ]