User manual ICOM IC-M402SA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-M402SA. We hope that this ICOM IC-M402SA user guide will be useful to you.

Lastmanuals help download the user guide ICOM IC-M402SA.


ICOM IC-M402SA : Download the complete user guide (1788 Ko)

Manual abstract: user guide ICOM IC-M402SA

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL VHF MARINE TRANSCEIVER iM402A (REMOTE-CONTROL MIC COMPATIBLE) iM402SA FOREWORD Thank you for purchasing this Icom product. The IC-M402A/M402SA VHF MARINE TRANSCEIVERS are designed and built with Icom's state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of moments of your time to thank you for making the IC-M402A/M402SA your radio of choice, and hope you agree with Icom's philosophy of "technology first. " Many hours of research and development went into the design of your IC-M402A/M402SA. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL -- This instruction manual contains important operating instructions for the IC-M402A/M402SA. EXPLICIT DEFINITIONS DEFINITION Personal injury, fire hazard or electric shock R WARNING! [. . . ] w Push [Y] or [Z] to select " [DSC·IC]. 6 r Push [DSC·IC] to enter the standby condition for Position Request call. · Channel 70 is selected and " " appears. , " then push 6 t Push [DSC·IC] to transmit the Position Request call. Scrolls e Push [Y] or [Z] to select the desired pre-programmed individual address. · The ID code for position request must be set in advance. 15) y After the Position Request call has been transmitted, the following indication is displayed. ·" " scrolls at the channel comment indicator. Scrolls u Push any key to exit the condition and return to the normal operation. 23 6 DSC OPERATION D Transmitting Position Report call Transmit a Position Report call when you want to announce your own position to a specific ship and to get an answer, etc. r Push [DSC·IC] to enter the standby condition for Position Report call. · Channel 70 is selected and " " appears. , " and push t Push [DSC·IC] to transmit the Position Report call. Scrolls e Push [Y] or [Z] to select the desired pre-programmed individual address. · The ID code for the position report call can be set in advance. 15) y After the Position Report call has been transmitted, stand by on Channel 70 until an acknowledgement is received. ·" " scrolls at the channel comment indicator. Scrolls u Push any key to exit the condition and return to the normal operation. 24 DSC OPERATION 6 I Receiving DSC calls D Receiving a Distress call While monitoring Channel 70 and a Distress call is received: The emergency alarm sounds for 2 minutes. · Push any key to stop the alarm. D Receiving a Distress acknowledgement While monitoring Channel 70 and a Distress acknowledgement to other ship is received: The emergency alarm sounds for 2 minutes. · Push any key to stop the alarm. "DSC" appears and " " scrolls at the channel comment indicator, then Channel 16 is automatically selected. Continue monitoring Channel 16 as a coast station may require assistance. "DSC" appears and " " scrolls at the channel comment indicator, then Channel 16 is automatically selected. 6 Scrolls Scrolls D Receiving a Distress Relay call While monitoring Channel 70 and a Distress Relay acknowledgement is received: The emergency alarm sounds for 2 minutes. · Push any key to stop the alarm. "DSC" appears and " " scrolls at the channel comment indicator, then Channel 16 is automatically selected. Scrolls 25 6 DSC OPERATION D Receiving a Group call While monitoring Channel 70 and a Group call is received: The emergency alarm or beeps sound depending on the received category. "DSC" appears and " " scrolls at the channel comment indicator. D Receiving an Individual call While monitoring Channel 70 and an Individual call is received: The emergency alarm or beeps sound depending on the received category. "DSC" appears and " " scrolls at the channel comment indicator. Scrolls Scrolls Push [DSC·IC] to change to the channel specified by the calling station for voice communication; push any other key to ignore the Individual call. Push [DSC·IC] to change to the channel specified by the calling station for voice communication; push any other key to ignore the Group call. 26 DSC OPERATION D Receiving an All Ships call While monitoring Channel 70 and an All Ships call is received: The emergency alarm sounds when the category is `Distress' or `Urgency'; 2 beeps sound for other categories. "DSC" appears and " " scrolls at the channel comment indicator. 6 D Receiving a Geographical Area call While monitoring Channel 70 and a Geographical Area call (for the area you are in) is received: The emergency alarm or beeps sound depending on the received category. "DSC" appears and " " scrolls at the channel comment indicator. 6 Scrolls Push [DSC·IC] to change to the channel specified by the calling station for voice communication; push any other key to ignore the All Ships call. Scrolls Push [DSC·IC] to change to the channel specified by the calling station for voice communication; push any other key to ignore the Geographical Area call. Monitor the selected channel for an announcement from the calling station. When no GPS receiver is connected or if there is a problem with the connected receiver, all Geographical Area calls are received, regardless of your position. 27 6 DSC OPERATION D Receiving a Position Report call While monitoring Channel 70 and a Position Report call is received: "DSC" appears and " " scrolls at the channel comment indicator. D Receiving a Position Request call While monitoring Channel 70 and a Position Request call is received: "DSC" appears and " " scrolls at the channel comment indicator. Scrolls Push [DSC·IC] to reply to the Position Request call; push any other key to ignore the Position Request call. Scrolls Push [DSC·IC] to reply to the Position Report call; push any other key to ignore the Position Report call. D Receiving a Position Request Reply call While monitoring Channel 70 and a Position Request Reply call is received: "DSC" and "POS REPLY" appear in the display. · The `Latitude' and `Longitude' from the called station is displayed and scrolled automatically in order of Latitude co-ordinates and then Longitude co-ordinates. D Receiving a Position Report Reply call While monitoring Channel 70 and a Position Report Reply call is received: "DSC" and "POS REPLY" appear in the display. · The `Latitude' and `Longitude' you have sent is displayed and scrolled automatically in order of Latitude co-ordinates and then Longitude co-ordinates. Scrolls 28 Scrolls INTERCOM OPERATION (IC-M402A only) I Intercom operation The optional Intercom function allows you to talk to the deck from the cabin. The optional HM-127 REMOTE-CONTROL MICROPHONE is required for Intercom operation. to enter Intercom mode. · The HM-127 power is automatically turned ON, even if the power is OFF. INT 7 IC-M402A (caller) HM-127 (listener) r After releasing the PTT switch you can hear the response through the speaker. t To return to the normal operation, push [DSC·IC] momentarily. · Other keys also turn the function OFF, however, the corresponding function is then activated (e. g. pushing [16·9] selects Channel 16). 6 7 INT IC-M402A w Push and hold [DSC·IC] again to call up. HM-127 · The transceiver and microphone emit call beeps. e Push and hold the PTT switch and speak at a normal voice level into the microphone. ·" " or " " appears on the caller or listener function display, respectively. [. . . ] · Pushing [16·9] also cancels the Intercom function. t Repeat steps e and r to input all characters, then push [16·9] to return to normal operation. · Available characters (space) () (4) (E) (!) (+) (5) (F) (P) (Z) (j) (t) (") (, ) (6) (G) (Q) (a) (k) (u) (#) () (7) (H) (R) (b) (l) (v) ($) (. ) (8) (I) (S) (c) (m) (w) (%) (/) (9) (J) (T) (d) (n) (x) (&) (0) (A) (K) (U) (e) (o) (y) () (1) (B) (L) (V) (f) (p) (z) (( ) (2) (C) (M) (W) (g) (q) ( )) (3) (D) (N) (X) (h) (r) For your reference: In case the Intercom mode is selected with the transceiver while the microphone power is OFF, the microphone power is automatically turned ON and the Intercom mode is selected. D Intercom beep function Push [LO/DX· IC SCR] for more than 1 sec. · Emits the Intercom beep while holding. (O) (Y) (i) (s) 48 COMMANDMIC® HM-127 11 I HM-127 supplied accessories Accessories included with the HM-127: Qty. 1 w Mounting base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-M402SA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-M402SA will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag