User manual ICOM IC-M801E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-M801E. We hope that this ICOM IC-M801E user guide will be useful to you.

Lastmanuals help download the user guide ICOM IC-M801E.


ICOM IC-M801E : Download the complete user guide (2901 Ko)

You may also download the following manuals related to this product:

   ICOM IC-M801E BROCHURE (1151 ko)

Manual abstract: user guide ICOM IC-M801E

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL MF/HF MARINE TRANSCEIVER iM801 E FOREWORD Thank you for purchasing this Icom product. The ICM801E MF/HF MARINE TRANSCEIVER is designed and built with Icom's superior technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of moments of your time to thank you for making the IC-M801E your radio of choice, and hope you agree with Icom's philosophy of "technology first. " Many hours of research and development went into the design of your IC-M801E. IMPORTANT READ THIS INSTRUCTION MANUAL CAREFULLY before attempting to operate the transceiver. SAVE THIS INSTRUCTION MANUAL. [. . . ] 0 k H z S H I P R: 2177. 0kHz T: 2189. 5kHz INTER2-1 R: 2177. 0kHz SEL OK · When "Manual set" is selected, enter the desired calling frequency via the keypad. ****** Individual ****** ---- Call frequency ---TX:2177. 0kHz RX:_2177. 0kHz OK · Select "Manual set" with [CH] then push [ENT], after that, enter the desired 9-digit ID via the keypad. ****** Individual ****** ------ Address ID -----________ OK r Rotate [CH] to select the desired pre-programmed traffic frequency, or "Manual set" then push [ENT]. When the pre-programmed traffic frequency is selected, go to step t. ****** Individual ****** -- Traffic frequency --Manual set y The calling stand-by screen is displayed as follows, verify the calling condition then push and hold [CALL] for 1 sec. to store the calling condition into the TX memory described in pages 22 and 37, if desired. ****** Individual ****** --------- Call --------To:IC-M801_1 Category:Routine Traffic:J3E TX 2134. 0kHz RX 2134. 0kHz 2177. 0kHz Call Freq:TX RX 2177. 0kHz Call Write-Menu 7 ÇT : 2 1 3 4 . 0 k H z I C - M 8 0 1 - 1 R: 2134. 0kHz T:12345. 0kHz IC-M801-2 R:12345. 0kHz SEL OK · When "Manual set" is selected, enter the desired calling frequency via the keypad. ****** Individual ****** -- Traffic frequency --TX:2134. 0kHz RX:_2134. 0kHz OK u After sending the call, the transceiver waits for an acknowledgement. Individual < Wait for ACK > F1B GPS Lat 34 34'N Lon135 34'E 12:34 Exit Continue to the next page 21 7 CALL PROCEDURE D Individual call operation-- continued i When receiving an acknowledgement, the display shows the received ID code, or the called station name. · Push [FREQ/CH]; - to select the traffic frequency if the called station is able to comply to the call. - to return to DSC watch mode when unable. ************************ Individual ACK * * * IC-M801 * Able to comply * * ************************ Exit CONVENIENT!You can store often used DSC calling conditions for quick and simple re-call. Up to 10 conditions can be stored into the memory with the following instructions. ¡ When call stand-by screen is displayed as in step y in page 21, push and hold [ENT] for 1 sec. TM Rotate [CH] to select the desired TX memory channel number. ****** Individual ****** --- TX memory write ---Ç0 : 1: 2: 3: 4: 5: SEL Write ************************ Individual ACK * * IC-M801 * * Unable to comply * * * Operator unavailable * ************************ Exit £ Push and hold [ENT] for 1 sec. again to store the condition into the selected memory channel. ****** Individual ****** --- TX memory write ---Ç0 : I n d i v i d u a l 9 8 7 6 5 4 3 2 1 1: 2: 3: 4: 5: SEL OK When the called station is unable to comply to the call, the reason may be displayed. o Announce the following message to the connected station. - The 9-digit identity (or call sign or other identification) of the station which you want to call. (your ship name). " - The 9-digit identity OR call sign (or other identification of the ship). When no acknowledgement is received: z Wait for 5 min. , then call again on the same or a different frequency. x If no acknowledgement is received after a 2nd call, wait for at least 15 min. before repeating the call. ¢ Push [ENT] to return to the calling stand-by condition. ****** TX memory ******* ------ Individual -----To:IC-M801_1 Category:Routine Traffic:J3E TX 2134. 0kHz RX 2134. 0kHz 2177. 0kHz Call Freq:TX RX 2177. 0kHz Call DEL INFORMATION The IC-M801E will not transmit the DSC call (except emergency call) even [CALL] when the set calling frequency is in busy. The transceiver waits the DSC call transmission until the calling frequency becomes clear in this case. Push and hold [CALL] for 1 sec. when transmitting the DSC call in set condition, or push [MODE SET] when returning to DSC watch mode. 22 CALL PROCEDURE 7 I Group call When you use DSC for calling the desired ship's group, use "Group" menu. e Select the desired 9-digit group code, then push [ENT]. · Use [CH] to select the group code when the desired group is pre-programmed. ********* Group ******** ------- Group ID ------ÇM a n u a l s e t 023456789 Group-1 023456788 Group-2 023456787 Group-3 023456786 Group-4 023456785 Group-5 SEL OK t Rotate [CH] to select the desired pre-programmed calling frequency, or "Manual set" then push [ENT]. When the pre-programmed call frequency is selected, go to step y. ********* Group ******** ---- Call frequency ---Manual set ÇT : 2 1 7 7 . 0 k H z S H I P R: 2177. 0kHz T: 2189. 0kHz INTER2-1 R: 2177. 0kHz SEL OK · When "Manual set" is selected, enter the desired code (last 8 digits only) via the keypad. - The first digit "0 (zero)" is fixed for group code. ********* Group ******** ------- Group ID ------0_______ · When "Manual set" is selected, enter the desired calling frequency via the keypad. ********* Group ******** ---- Call frequency ---TX:2177. 0kHz RX:_2177. 0kHz OK OK r Rotate [CH] to select the desired pre-programmed traffic frequency, or "Manual set" then push [ENT]. When the pre-programmed call frequency is selected, go to step t. ********* Group ******** -- Traffic frequency --Manual set y The calling stand-by screen is displayed as follows, verify the calling condition then push and hold [CALL] for 1 sec. to store the calling condition into TX memory described in pages 22 and 37, if desired. ********* Group ******** --------- Call --------To:Group-1 Category:Routine Traffic:J3E TX 2 1 3 4. [. . . ] · Pushing [Y]/[Z] on the microphone also tunes the frequency. CH ---GPS--Lat 45 59'N Lon134 44'E 0 1 2 3 4A 16:23 "Ç" indicator disappears when programming is completed. D Transmit frequency q Select the desired channel to be programmed. to program the user channel. · 3 beeps sound. RX TX J3E SIMP CH ---GPS--Lat 45 59'N Lon134 44'E 0 1 2 3 4A 16:23 "T X" indicator blinks. CH ---GPS--Lat 45 59'N Lon134 44'E 0 1 2 3 4A 16:23 e Enter the desired 5 or 6 digit frequency via the keypad. · [GRP] and [CH], as well as [Y]/[Z] on the microphone cannot be used. RX J3E SIMP "T X" indicator disappears. TX CH ---GPS--Lat 45 59'N Lon134 44'E 0 1 2 3 4A 16:23 62 SPECIFICATIONS · General · Frequency coverage Receive Transmit : (Unit: MHz) 14 · Transmitter 0. 5­29. 9999 1. 6­2. 9999 4. 0­4. 9999 6. 0­6. 9999 8. 0­8. 9999 12. 0­13. 9999 16. 0­17. 9999 18. 0­19. 9999 22. 0­22. 9999 25. 0­27. 5000 : 2, 187. 5 kHz, 4, 207. 5 kHz, 6, 312. 0 kHz, 8, 414. 5 kHz, 12, 577. 0 kHz, 16, 804. 5 kHz : J3E (USB/LSB*), H3E, * J2B (AFSK), F1B (FSK), A1A* (CW) F1B *Receive only · DSC channels · Output power 1. 6­3. 9999 MHz 4. 0­27. 5000 MHz · Spurious emission · Carrier suppression · Unwanted sideband suppression · Mic. connector : 85 W p-p 125 W p­p : 43 dB below peak output power : 40 dB below peak output power : 55 dB below peak output power (w/1 kHz AF input; at max power) : 8-pin connector (2. 4 k) · Receiver · Sensitivity Transceiver · Type of emission Transceiver DSC receiver · No. of memory Ch. : · Antenna connector · Usable temp. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-M801E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-M801E will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag