User manual ICOM IC-PCR1000

[. . . ] INSTRUCTION MANUAL COMMUNICATIONS RECEIVER FOR COMPUTER iPCR1000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT READ ALL INSTRUCTIONS and on-line help carefully and completely before using the receiver. FEATURES · USER-SELECTABLE INTERFACE Users can choose from 3 different operating screens depending on their ability level and preference. · WIDE FREQUENCY RANGE, MULTI-MODE RECEIVE The IC-PCR1000 has a wide frequency coverage from 0. 5 MHz to 1300 MHz* with all mode receive capability. * Some frequency ranges are restricted depending on version. SAVE THIS INSTRUCTION MANUAL -- This instruction manual contains important operating instructions for the IC-PCR1000 COMMUNICATIONS RECEIVER FOR COMPUTER. USE antenna(s), such as a well-matched 50 antenna and feedline. [. . . ] Installing starts. Click Click 5 1 INSTALLATION I Uninstallation This section describes [IC-PCR1000] uninstallation. D Windows XP [Procedure] q Click <Start> and select [Control Panel]. w Click [Add or Remove Programs] and select [ICOM ICPCR1000] and click <Change/Remove>. e [IC-PCR1000] Uninstall Wizard starts automatically. r Click <Uninstall> and follow the prompts. u After the installation is completed, click [Finish]. D Windows 98/98SE/Me/2000 [Procedure] q Click <Start> and select [Control Panel] from the [Settings] menu. w Double-click [Add or Remove Programs] and select [ICOM IC-PCR1000] and click <Change/Remove. . . >. e Follow the prompts. Click i Eject the CD. 6 INSTALLATION 1 I Starting the IC-PCR1000 D Windows XP q Before launching the program, make sure the IC-PCR1000 interface unit power is turned ON (the LED lights when power is on). w Click <Start> and select [PCR1000] from the [All Programs] menu. e Select the [IC-PCR1000] program. D On-line help information See the on-line help for software usage. q Click the [Contents] in the [Help] menu to bring up the online help. w Click the desired information you want to know. D Software update information Software update information will be available at the Icom America home page: http://www. icomamerica. com/ D Windows 98/98SE/Me/2000 q Before launching the program, make sure the IC-PCR1000 interface unit power is turned ON (the LED lights when power is on). w Click <Start> and select [PCR1000] from the [Programs] menu. e Select the [PCR1000] program. I Serial port setting Select the RS-232C serial port correctly if the title bar displays "COM port trouble?". q Before launching the program make sure the IC-PCR1000 interface unit power is turned on (the LED lights when power is on). e Click the [POWER] button in the tool bar to temporarily pause the program. r Click the [PORT] button to bring up the [RS-232C PORT Number] dialog box. t Click the desired port COM number to choose it. 7 2 PANEL DESCRIPTION r FREQ (frequency) indication Indicates the receive frequency and data as it is being input such as memory channel numbers, etc. o i t TS (tuning step) indicator This is the frequency increment used when selecting a frequency using the [Main dial] and when searching for signals using a scan function. Also indicates the Smeter squelch receive level set via the [SQUELCH] scroll bar. !4 PROG (program scan) button Used to start/stop program scan. [. . . ] $6 II (sweep pause) button Pauses/resumes a band scope function sweep. $7 SPAN +/­ buttons Select one of four levels for the band scope frequency span. #9 +200k/­200k (Max. frequency span value) indicators Indicate the upper and lower observable frequency limits around a receive frequency. In the diagram, the upper and lower limits are +200 kHz and ­200 kHz. [. . . ]