User manual ICOM IC-T41A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ICOM IC-T41A. We hope that this ICOM IC-T41A user guide will be useful to you.

Lastmanuals help download the user guide ICOM IC-T41A.


ICOM IC-T41A : Download the complete user guide (4809 Ko)

Manual abstract: user guide ICOM IC-T41A

Detailed instructions for use are in the User's Guide.

[. . . ] 14, 26) *Select one of CTCSS or DTCS for your convenience. 2 types of "Ring" function The "Smart-Ring"* function and the "Call-Ring" function are available for smart and simple station calls providing a telephonestyle ring when called. 19­20) *"Smart-Ring" function available only when all of your group station use the same CTCSS tone code on the same operating channel. SUPPLIED ACCESSORIES · Belt clip (w/screws). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 · Battery charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 set D Attach the belt clip to the transceiver as illustrated below. Use the supplied screws only. ii IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL-- This instruction manual contains important operating instructions for the IC-T41A PMR446 FM transceiver. CAUTIONS R WARNING!NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm away from the lips and the transceiver is vertical. R WARNING! [. . . ] If the battery pack becomes wet, be sure to wipe it dry BEFORE attaching it to the transceiver. If your Ni-Cd or Ni-MH battery pack seems to have no capacity even after being charged, completely discharge it, then fully charge the battery pack again. If the battery pack still does not retain a charge (or only very little charge), a new battery pack must be purchased. 5 BATTERY PACKS 2 ` Battery charging D Regular charging with the BC-146 The supplied* BC-146 provides regular charging of optional battery pack with/without transceiver. Especially when charging the battery with the transceiver; · Be sure to attach the spacer (Spacer B/C) to the adaptor (Spacer A) with the orientation as follows. · Attach the spacer (Spacer B/C) to the adaptor with the orientation of the stamp " " pointing up. Check orientation Spacer A and Spacer B/C NOTE: Push the notch carefully when removing the spacer from the adaptor. 6 2 BATTERY PACKS D Regular charging with the BC-146 (continued) · First insert the spacer in to the BC-146, then insert the battery or the transceiver. Avoid overcharging-- Batteries must be removed from the charger to stop charging. Batteries should not be charged for more than 24 hours. Turn power OFF BP-209N, BP-210N or BP-222N only AC adaptor Check orientation* Charging indicator *Viewable stamps of the spacer may differ according to the spacer combination. 6 for details. 7 BATTERY PACKS 2 D Rapid charging with the BC-121N+AD-101 The optional BC-121N allows up to 6 battery packs to be charged simultaneously. · Six AD-101 · An AC adaptor (may be supplied with the BC-121N depending on version). Turn power OFF. AC adaptor (purchased separately) AD-99N Charge indicator (each indicator functions independently) D Rapid charging with the BC-144N+AD-99N The optional BC-144N provides rapid charging of optional battery packs. The following are additionally required: · One AD-99N (depends on version). · An AC adaptor (may be supplied with the BC144N depending on version). Turn power OFF. w Select the desired CH 1 to CH 15 that you want to assign the CTCSS tone frequency to. r Push [PTT] the necessary number of times to choose the 10 digit of the desired code from the channel list. (See next page. ) y Push [PTT] the necessary number of times to choose the 1 digit of the desired code from the frequency list. 28 as CH1; q While pushing and holding [PTT], [S-Ring/C-Ring] and [MONI], turn [VOL] to power ON. w Select the CH 1, then push and hold [S-Ring/C-Ring] until a beep (Pi) is emitted. r Push [S-Ring/C-Ring], then push [PTT] eight times to choose the 1 digit of the desired code. y Turn the power OFF, and then ON again. 14 3 BASIC OPERATION · CTCSS tone code list : EIA/TIA standard code (Recommended to use these. ) No. OFF 67. 0 69. 3* 71. 0 71. 9 74. 4 77. 0 79. 7 82. 5 85. 4 88. 5 91. 5 94. 8 97. 4 100. 0 103. 5 No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Freq. 107. 2 110. 9 114. 8 118. 8 123. 0 127. 3 131. 8 136. 5 141. 3 146. 2 151. 4 156. 7 159. 8 162. 2 165. 5 167. 9 No. 171. 3 173. 8 177. 3 179. 9 183. 5 186. 2 189. 9 192. 8 196. 6 199. 5 203. 5 206. 5 210. 7 218. 1 225. 7 229. 1 No. 48 49 50 51 52 Freq. 233. 6 241. 8 250. 3 254. 1 270. 4 *Reserved for Smart-Ring function (Unit: Hz) · Confirmation beep list Push [PTT] no 1 (Once) 2 (Twice) 3 (Third) 4 (Fourth) Confirmation beep Push [PTT] 5 (Fifth) 6 (Sixth) 7 (Seventh) 8 (Eighth) 9 (Ninth) Confirmation beep ; Single beep ; Long beep 15 BASIC OPERATION 3 D CTCSS FIND This transceiver can detect the CTCSS tone frequency in the received signal. [. . . ] In such case, we recommend to charge the battery or replace the batteries, when the "Low Battery" Indication appears during operation. 22 6 SPECIFICATIONS GENERAL · Frequency coverage : 446. 00625­446. 09375 MHz · Mode : F3E (FM) · No. : 8 (simplex) · Power supply requirement : 7. 2 V or BP-222N · Current drain : 0. 6 A approx. : 38 · Dimensions : 54(W) × 128(H) × 37(D) mm (projections not included) · Weight (approx. ) : 317 g (including BP-222N) TRANSMITTER · Output power · Ext. connector : Less than 500 mW ERP : 3-conductor 2. 5 (d) mm/2. 2 k RECEIVER · Sensitivity · Audio output power (at 7. 2 V DC) · Ext. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM IC-T41A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM IC-T41A will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag