User manual ICOM IC-U220

[. . . ] (5 to 10 cm) away from the lips and the transceiver is vertical. SAVE THIS INSTRUCTION MANUAL -- This instruction manual contains important operating instructions for the IC-F33GT/GS VHF TRANSCEIVER and IC-F43GT/GS UHF TRANSCEIVER. R CAUTION!NEVER operate the transceiver with a headset or other audio accessories at high volume levels. NEVER short the terminals of the battery pack. EXPLICIT DEFINITIONS DEFINITION Personal injury, fire hazard or electric shock RWARNING may occur. CAUTION NOTE Equipment damage may occur. [. . . ] r Set the desired digit using [UP], [DOWN], [TX Code CH Up] or [TX Code CH Down] or 10-keypad*. *Depending on version. w Push [TX Code CH Select] for 1 sec. e Push [TX Code CH Select] to select the desired digit to be edited. r Set the desired digit using [UP], [DOWN], [TX Code CH Up], [TX Code CH Down] or 10-keypad. * *Depending on version. t Push [TX Code Enter] to set the digit. The editable digit will move to the right automatically. · When the 10-keypad is used to set, the editable digit will move to the right automatically without pushing [TX Code CH Select]. y Repeat r and t to input all allowable digits. u Push [Call] or [PTT] to transmit the edited TX code. t Push [TX Code CH Select] to set the digit. The editable digit will move to the right automatically. · When the 10-keypad is used to set, the editable digit will move to the right automatically without pushing [TX Code CH Select]. y Repeat r and t to input all allowable digits. u Push [Call] or [PTT] to transmit the edited TX code. 14 BASIC OPERATION D DTMF transmission If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. TO SELECT A TX CODE: q Push [DTMF Autodial]-- a DTMF channel appears. w Push [UP] or [DOWN] to select the desired DTMF channel. e Push [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel. 3 I User set mode User set mode is accessed with [User Set Mode] and allows you to set seldom-changed settings. In this case you can "customize" the transceiver operation to suit your preferences and operating style. · " " appears and the mute is released. · The programmed text message (e. g. " ") and the calling station ID (or text) is displayed alternately, depending on the setting. · " " appears or blinks depending on the setting. D Displaying the received call record -- Queue indication The transceiver memorizes the calling station IDs for record. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once the transceiver is powered OFF, the all records are cleared. q Push [P1] (Digital) for 1 sec. · Displays following indication. When a record is available Appears Appears or blinks When no record is available w Push and hold [PTT], then speak into the microphone at a normal voice level. NOTE: Only one station is permitted to speak. ·" ·" " appears. " appears while receiving a signal. e Release [PTT] to return to receive. r To finish the conversation, push [MONITOR] (Moni(Audi)) to send the `Clear down' signal. · Either station can send a `Clear down' signal. ·" " is displayed for 2 sec. (approx. ) · " " disappears and the transceiver returns to the standby condition. w Push [UP] or [DOWN] to select the desired call. [. . . ] (For BC-119N) · OPC-515L/OPC-656 DC POWER CABLES Allows charging of the battery pack using a 13. 8 V power source instead of the AC adapter. OPC-515L: For BC-119N OPC-656 : For BC-121N D OTHER OPTIONS · SP-13 EARPHONE Provides clear receive audio in noisy environment. · HM-131L SPEAKER-MICROPHONE Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. · HS-94/HS-95/HS-97 HEADSET + VS-1L VOX/PTT CASE HS-94: Ear-hook type HS-95: Neck-arm type HS-97: Throat microphone VS-1L: VOX/PTT switch box for hands-free operation, etc. [. . . ]