User manual ICOM IC202 SERVICE MANUAL

[. . . ] The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory. Position exchange with external GPS receiver When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible. * NMEA 0183 output and RS-232C interface are required. [. . . ] ** Position mapping software required (Not supplied by Icom ). And more digital features · 20-character short data message · Digital code squelch · EMR communication · Digital pocket beep · Stand-by beep 7W powerful output power A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time. * 5W for UHF. 200 memory channels and 10 memory banks Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom's exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links. Built-in CTCSS/DTCS Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency. Other features · NOAA weather channel receive * (* IC202 USA version only) · Automatic repeater function (USA version only) · Reversible control knob and up/down buttons assignment · Durable construction and simple operation · 16 DTMF dial memory · PC cloning capability IC-U82 IC202 VHF AND UHF TRANSCEIVERS SPECIFICATIONS GENERAL · Frequency coverage (unit : MHz): Version USA Europe IC202 Tx 144­148*1 Rx 136­174*1 144­146 IC-U82 Tx 420­450*2 Rx 400­479*2 430­440 · Antenna impedance : 50 (BNC) · Dimensions (W×H×D) : 54 × 139 × 36. 7 mm; (Projections not included) 21/8 × 515/32 × 17/16 in · Weight (approx. ) : 390g; 13. 8oz (w/ant. and BP-222N) RECEIVER : Double conversion superheterodyne · Intermediate freq. (12­20 V DC required) SPEAKER-MICROPHONES HEADSETS and PTT/VOX UNIT HS-94 INTERNAL UNITS CS-V82 CLONING SOFTWARE + OPC-478/U CLONING CABLE Provides quick and easy programming of memory channel, names, etc. OPC-474 CLONING CABLE Use for transceiver-to-transceiver data cloning. MB-86/MB-103 BELT CLIPS MB-103: Alligator type clip. MB-96N/MB-96F LEATHER BELT HANGERS MB-96N: Swivel belt hanger. SP-13 EARPHONE Provides clear audio even in noisy environments. VS-1L HS-95 HM-75A HM-131L HS-97 HS-94 : Earhook headset with flexible boom microphone. HS-95 : Behind-the-head headset with flexible boom microphone. HS-97 : Throat microphone fits around your neck and picks up speech vibration. Required when using these headsets with the transceiver. [. . . ] HS-97 : Throat microphone fits around your neck and picks up speech vibration. Required when using these headsets with the transceiver. Includes VOX, PTT and "one-touch" PTT with a time-out timer. UT-118 UT-108 DTMF DECODER Provides DTMF decode and pager capabilities. HM-75A : Allows you to remotely select operating channel, etc. , according to program. [. . . ]