User manual IIYAMA PROLITE E2280HS

[. . . ] TCO Certified is a third party verified program, where every product model is tested by an accredited independent test laboratory. 0 requirements: Visual Ergonomics Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are: Light levels without color tint, Uniform color and luminance, Wide color gamut Calibrated color temperature and gamma curve Wide luminance level, Dark black levels, Low monitor blur Electrical Safety Product fulfills rigorous safety standards Emissions Low alternating electric and magnetic fields emissions Low acoustic noise emissions Some of the environmental features of the TCO Displays 5. 0 requirements: The brand owner demonstrates corporate social responsibility and has a certified environmental management system (EMAS or ISO14001) Very low energy consumption both in on- and standby mode Restrictions on chlorinated and brominated flame retardants, plasticizers and polymers Restrictions on heavy metals such as cadmium, mercury and lead (RoHS compliance) Both product and product packaging is prepared for recycling The brand owner offers take-back options The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. [. . . ] Periodic cleaning with a soft dry cloth is recommended. The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/250V must be used. However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama. Remove the transportation restraint by pulling to the right while keeping a constant pressure to the top of the display. Please remember not to place any pressure onto the LCD itself but only on the surrounding bezel. Care must be taken as the displays base is sprung loaded and can expand quickly if not handled correctly. Do not give a strong impact to the monitor. <Remove> Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. adjust the monitor's angle to your own preference. NOTE Do not touch the LCD screen when you change the height or the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you change the height or the angle. Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height. To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 23. You are also able to adjust the picture by following the button operation shown below. There are additional Menu items which can be switched by using the / Buttons. Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Then, use the / Buttons to highlight the desired adjustment icon. Press the AUTO Button to leave the menu, and the settings you just made would be automatically saved. [. . . ] Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments. The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. [. . . ]