User manual IIYAMA PROLITE T2451MTS

[. . . ] All places of operation are characterised by their connection to the public low voltage power supply system. IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www. iiyama. com You can access the Web page of different countries from there. We reserve the right to change specifications without notice. [. . . ] Then wipe the cabinet with a soft dry cloth. Periodic cleaning with a soft dry cloth is recommended. because these will damage the LCD screen. FOR YOUR SAFETY 3 ENGLISH BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1024 × 768 : ProLite T1531SR / ProLit T1531SAW / ProLite T1532SR Supports Resolutions up to 1280 × 1024 : ProLite T1731SR / ProLite PROLITE T2451MTS / ProLite T1931SR / ProLite T1931SAW ENGLISH 2 High Contrast 500:1 (Typical: with Touch panel) / Brightness 200cd/m (Typical: with Touch panel) : ProLite T1531SR / ProLite T1532SR 2 High Contrast 500:1 (Typical: with Touch panel) / Brightness 230cd/m (Typical: with Touch panel) : ProLit T1531SAW 2 High Contrast 900:1 (Typical: with Touch panel) / Brightness 200cd/m (Typical: with Touch panel) : ProLite T1731SR / ProLite T1931SR 2 High Contrast 1000:1 (Typical: with Touch panel) / Brightness 230cd/m (Typical: with Touch panel) : ProLite PROLITE T2451MTS 2 High Contrast 900:1 (Typical: with Touch panel) / Brightness 230cd/m (Typical: with Touch panel) : ProLite T1931SAW Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® 95/98/2000/Me/XP/Vista/7 Compliant Power Management (VESA DPMS Compliant) VESA Mounting Standard (100mm×100mm) Compliant Keyhole for Security Lock 4 BEFORE YOU OPERATE THE MONITOR CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. Power Cable* RS-232C Cable Screw (M3x6mm) Safety Guide CAUTION 1 D-Sub Signal Cable DVI-D Cable USB Cable Audio Cable Touch Panel Driver Disk (CD-ROM)*2 Quick Start Guide *2 This CD-ROM contains the touch screen driver software. Install the Touch Panel Driver Disk after connecting the computer to the monitor with RS-232C Cable or USB Cable. For the details, see Readme file in the Touch Panel Driver Disk. SPECIAL NOTES ON TOUCH PANEL Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch. This could invalidate any remaining warranty. We recommend to use a plastic stylus (tip R0. 8 or over) or finger. WALL MOUNTING WARNING W h e n y o u u s e w i t h t h e w a l l m o u n t i n g , i n consideration of thickness of the mounting stage, tighten the M4 Screw with washer which "L" length is 8mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. L Chassis Mounting Stage Screw BEFORE YOU OPERATE THE MONITOR 5 ENGLISH *1 The rating of the Power Cable enclosed in 120V area is 10A/125V. The vertical position of the overall display should be changing accordingly while you are doing this. Press the Button lastly, it ends, any changes are saved in the memory. A U TO A D J U S T H-POSITION V- P O S I TI O N H - S I ZE FI N E 100 NOTE When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD TIMEOUT has passed. button can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Adjustments for H/V-POSITION, H-SIZE and FINE are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. OPERATING THE MONITOR 9 ENGLISH ADJUSTMENT MENU CONTENTS C ON TR A ST B R IGH TN ESS ENGLISH 1280x1024 FH: 63KHz FV: 59. 9Hz Adjustment Item Problem / Option Too dull Too intense Too dark Too bright Button to Press CONTRAST BRIGHTNESS * * Direct Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. BRIGHTNESS: Press the Button when the Menu is not displayed. Direct LOCK MODE: Press the POWER SWITCH and Button at the same time when the Menu is not displayed. Adjustment Item POWER OSD LOCK UNLOCK LOCK UNLOCK Problem / Option The POWER SWITCH is Locked. The OSD menu is Unlocked. TOUCH FANCTION DISABLE: ON: Pressing and holding of the Button and the Button at the same time when the Menu is not displayed, massage "TOUCH DISABLE" will appear on the top right corner. OFF: Pressing and holding of the Button and the Button at the same time for about 5 seconds when the Menu is not displayed, till "TOUCH DISABLE" disappears. 10 OPERATING THE MONITOR Only Analog Input A U TO A D J U S T H-POSITION V- P O S I TI O N H - S I ZE FI N E Adjustment Item AUTO ADJUST *1 Problem / Option Button to Press Direct Adjust H/V-POSITION, H-SIZE and FINE automatically. H-POSITION Too left Too right Too low Too high Too narrow Too wide V-POSITION H-SIZE *2 FINE *2 To correct flickering text or lines *1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. *2 See page 14 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. [. . . ] It is possible that the video signal from the computer may be on while the H or V sync signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly. OPERATING THE MONITOR 17 ENGLISH Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. [. . . ]