User manual IIYAMA PROLITE TE4262MTS

[. . . ] USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Directive". In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 31 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. Menu items which can be switched by using the Picture Picture Mode Contrast Brightness Color Tint Sharpness Backlight ACR Color Temp. Input Resolution Standard 88 43 55 50 5 5 OFF 9300 K ENGLISH :Move Enter :Enter Exit :Exit or ENTER B Select the Menu item of the adjustment you want to make. Press the / Buttons to highlight the Buttons and enter the menu page. Use the C Press the appropriate adjustment or setting. / Buttons to make the D Press the EXIT Button to leave the menu, and the settings you just made would be automatically saved. For example, to correct for vertical position, select Menu item of Option. Use the Buttons to change the vertical position settings. The vertical position of the overall / display should be changing accordingly while you are doing this. Press the EXIT Button lastly, it ends, all changes are saved in the memory. Option Aspect ratio PIP Video Source Auto Adjustment Clock Frequency Phase H. Position V. Position Ambient Light Sensor Auto Detection Touch Feature Full OFF VGA 16 22 50 50 OFF OFF ON Exit :Exit :Move Enter :Enter NOTE The MENU / EXIT Button can be used to return previous menu item. Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu. Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings. 18 OPERATING THE MONITOR [LOCK MODE] * Available for Back Controller only. Control Panel Button: / buttons for about 5 seconds when Menu is not displayed, will lock/ Pressing and holding the unlock the Control Panel Button Lock function. Remote Control Function: Pressing and holding the Menu and buttons for about 5 seconds when Menu is not displayed, will lock/unlock the Remote Control Lock function. OSD Menu Function: Pressing and holding the / buttons for about 5 seconds when Menu is not displayed, will lock/ unlock the OSD Menu Lock function. Power On/Off Function: Pressing and holding the Menu and buttons for about 5 seconds when Menu is not displayed, will lock/unlock the Power On/Off Lock function. [OPENING iiyama LOGO] * Available for Remote Control only. Pressing and holding the Enter button for about 3 seconds when Menu is not displayed, will lock/ unlock the Opening Logo function. OPERATING THE MONITOR 19 ENGLISH ADJUSTMENT MENU CONTENTS Picture Picture Picture Mode Contrast Brightness Color Tint Sharpness Backlight ACR Color Temp. Input Resolution Standard 88 43 55 50 5 5 OFF 9300 K ENGLISH :Move Enter :Enter Exit :Exit Adjustment Item Problem / Option Standard Button to Press For general windows environment and monitor default setting. Displays a picture on a screen set by Image Settings adjustments. Picture Mode*2 Vivid Cinema User Contrast Brightness*1 Too dull Too intense Too dark Too bright Too week Too strong Purplish Greenish Too soft Too sharp Brightness of back light is reduced. ON OFF 12000°K 9300°K 6500°K User Increased Contrast Ratio Typical Contrast Ratio Strong Bluish white Bluish white Reddish white Red Green Blue Too weak Too strong Color*2 Tint*2 Sharpness Backlight*3 ACR*3 Color Temp. Input Resolution Not available on this model. *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *3 Backlight and ACR are desabled when the Ambient Light Sencer is actived. 20 OPERATING THE MONITOR Sound Sound Volume Mute Audio Source Speaker 8 OFF Audio 1 Internal :Move Enter :Enter Exit :Exit Adjustment Item Volume Problem / Option Too soft Too loud ON OFF Audio1 Button to Press Mute Turn off the sound temporarily. Return the sound volume to the previous level. [. . . ] Problem Check The Power Cable is firmly seated in the socket. Please check with another piece of equipment. If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness. [. . . ]