User manual IKEA TILLREDA 405.416.47

[. . . ] Safety information Safety instruction Product description Indicators Daily use Cookware guidance For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Do not leave the appliance unattended during operation. [. . . ] Glass ceramic can be damaged if also dropped on the floor. Do not use the cooking zones with empty cookware or without cookware. Never line any part of the appliance with aluminium foil. Never place plastic or any other material which may melt in or on the appliance. Keep product connected to power socket after use until the fan and the heat indicator has shut off. According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore, we recommend cooking at the lowest possible temperatures and not browning foods too much. Control panel layout On/Off Power level display Lock/Child lock Power level setting - / + You operate the hob by touching sensor fields. Pot incorrectly positioned or missing This symbol appears if the pot is not suitable for induction cooking, is not positioned correctly or is not of an appropriate size for the cooking zone selected. If no pot is detected within 30 seconds of making the selection, the cooking zone switches off. Residual heat If display shows "H", the cooking zone is still hot. When the cooking zone cools down, the display goes off. After insert the plug into main supply, the child lock will be activated. Press and hold the Child Lock key for 3 seconds to deactivate. After you switch the appliance off, the cooking zones need some time to cool down. Use residual heat for melting and keeping food warm. Don't disconnect the product without waiting for the to be removed from display. Press the ON/OFF key, the screen will display "0" as in standby mode and the power indicator light will light up. If there is no heat setting selected within 30 seconds, the hob will switch off automatically without pressing the ON/ OFF key. Press ON/OFF key during operation, the hob will switch off. Press or to control the power level during operation. Press , the power level will go straight to "9". [. . . ] What is not covered under this warranty?Caused by failure to observe operating instructions, incorrect installation or by connection to the wrong voltage, damage caused by chemical or electrochemical reaction, rust, corrosion or Water damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal environmental conditions. Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible colour differences. Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings. [. . . ]