User manual INDESIT KP902GX

[. . . ] This label will be used by the Electrolux authorized service representative in the event that your freezer needs servicing. To dispose of the freezer it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. [. . . ] Supply Follow the following instructions to fill the freezer for the first time or after defrosting process. Allow the freezer to work for 6 hours before putting any food. If you want to fill with fresh food, it is important to respect the maximum daily freezing capacity (see Freezing Capacity) 03. Do not put wet products otherwise water will freeze and it will be difficult to take out. Your freezer has a temperature control knob located in the front upper part of the unit. When you turn the freezer on for the first time, press the "Fast Freezing" switch to on position for at least 2 hours ( maximum 4 hours) before storing any food or packing in the freezer. This will ensure that the cabinet is enough cold. Adjust the temperature control according with your needs, however it is recommended to keep it between 2 and 3 position for normal use. To stop the freezing cycle, turn the temperature control knob to OFF position Note If you turn the temperature control to "OFF" position, it will stop the cooling cycle, which does not mean that will turn the freezer off. If the unit is disconnected, or losses the main power source, need to wait 3 to 5 minutes to restart the unit, before that time the unit will not turn on. Models 115V / 60Hz ENG Models 220V / 50Hz ENG 39 electrolux usage instructions usage instructions electrolux 40 WARNING Do not use boiled water because it will damage plastic parts. Cool air with constant circulation keeps constant temperature in the freezer cavity. It is important to distribute foods well to facilitate the cold air distribution between them. Warm food has to change to ambient temperature before storing it on the freezer, if not will make compressor to work more time and also food will take longer to freeze, which might lose food properties. Organize and put labels on the food recipients to stay less time with door open and find faster what you are looking for. It may raise the electricity consumption and lessen the effect of refrigeration. When defrosting, cut off the power, open the door and move frozen foods to a shady and cooling place, defrost with a plastic scraper, or let the temperature rise naturally till frost melts. Then wipe away remaining ice and water, and switch on electricity again. Notes: Never use sharp metal tools or it will damage the freezer. Transportation and Handing When transporting, hold the base and lift the freezer carefully with the tilted angle less than 45 degrees. Never place it upside down horizontal wise. Be sure to put tape on the shelves, drawers that can move inside the cabinet 03. [. . . ] Moisture forms on inner freezer walls Weather is hot and damp, which increases the internal rate of frost buildup. Lid is kept open too long or too frequently. Louder sound levels whenever freezer is ON Modern freezers have increased storage capabilities and more uniform temperatures. See item “lid does not close”. [. . . ]