User manual INDESIT W 133

[. . . ] M Washing machine Instructions for installation and use 9!! Quick guide Here are the 12 topics explained in this manual. Read, learn and have fun: you will discover many secret ways to get a better wash, more easily and making your washing machine last longer. 1. 10) Installation, after delivery or transport, is the most important operation for the correct functioning of your washing machine. That the electric system conforms to regulations; 2. [. . . ] To clean the exteriors and the rubber parts of the appliance, always use a soft cloth dipped in warm and soapy water. WRONG Leave the washing machine plugged in while cleaning. Even during maintenance, the appliance should always be unplugged. Never use solvents or abrasives to clean the external and rubber parts of the washing machine. It is removable and can easily be cleaned by leaving it under running water. Go on holiday without thinking about her. Before leaving, always make sure that the washing machine is unplugged and that the water supply is turned off. Is the hose correctly connected to the tap?There could be work in progress in your building or street. If the water is very calcareous, or if work has recently been carried out on the water piping, the tap filter could be clogged with particles and debris. The tract of the rubber hose bringing water to washing machine must be as straight as possible. Make sure it is not squashed or kinked. The washing machine continuously fills and drains water. Is the drain hose positioned too low?It must be installed at a height ranging from 60 to 100 cm. Is the end of the hose immersed in water?Does the wall drainage system have a breather pipe?If the problem persists even after these checks, turn the water supply off the machine and call for assistance. If you live on an upper floor of your building, there may be a problem with your drain trap. To solve this problem, a special valve must be installed. The programme selector knob keeps turning? Wait a few minutes for the drain pump to empty the tub, switch the washer off, Instructions for installation and use 8 Is the drain hose kinked?The tract of the drain hose must be as straight as possible. Make sure the drain hose is not squashed or kinked. Is the washing machine's drain duct clogged?Is there an extension of the drain hose?If so, is it positioned incorrectly, blocking the water flow? Is there space between the machine and adjacent units?If it is not a built-in model, the washing machine will oscillate a bit during the spin cycle. [. . . ] Allow a few minutes at the end of the program for the lock to release. In case of malfunctio-ning, first close the water tap and unplug the appliance from the wall socket; do not under any circumstances touch internal parts in order to attempt repairs. 7. Never open the detergent dispenser while the appliance is functioning; do not use hand wash detergent because the abundance of foam could damage its internal parts. How to change the power supply cable (For this operation we suggest you contact a qualified engineer) The washing machine power supply cable is special and can be purchased exclusively from authorised Technical Service Centres. Make sure that the machine is switched off and unplugged. [. . . ]