User manual INDESIT WAX120

[. . . ] Never use hoses that have already been used, always use the new ones provided with your machine; 3. That the washing machine is levelled properly; something worth checking to aid the performance of your washing machine; 4. That the drum's fixing screws have been removed from the back of the washing machine. What goes in your washing machine and how to start it (p. [. . . ] When you bleach during a normal wash cycle, pour the detergent and any additives in the special compar tments, press button F (stain removal), set the programme you desire and turn the washing machine on. 7 Instructions for installation and use Troubleshooting Before calling, read the following In most cases, when your washing machine fails to work, the problems arising can be easily solved without having to call for a technician. Before calling for assistance, always check these points. Is the plug correctly inserted into the socket?It could have been moved whilst cleaning. A circuit breaker may have switched off as a result of too many electrical appliances working at the same time. Or maybe due to a general failure in your entire area. Is the washing machine door closed properly?For safety reasons, the washing machine cannot work if the door is open or not shut properly. Is the programmed start knob, in the correct position for those models concerned?For safety reasons, if the washing machine does not load water, it cannot start a wash cycle. It must be installed at a height ranging from 60 to 100 cm. Is the end of the hose immersed in water?Does the wall drainage system have a breather pipe?If the problem persists even after these checks, turn the water supply off the machine and call for assistance. If you live on an upper floor of your building, there may be a problem with your drain trap. To solve this problem, a special valve must be installed. The programme selector knob keeps turning?Wait a few minutes for the drain pump to empty the tub, switch the washer off, Instructions for installation and use 8 Is the drain hose kinked?The tract of the drain hose must be as straight as possible. Make sure the drain hose is not squashed or kinked. is the washing machine’s drain duct clogged? [. . . ] Before loading the washing machine, make sure the drum is empty. Never touch the washing machine when barefoot or with wet or damp hands or feet. Never use extensions or multiple plugs, which are particularly dangerous in humid environments. The power supply cable must never be bent or dangerously compressed. [. . . ]