User manual INFINITY 6030CS

[. . . ] The duration of the speaker's warranty depends on the laws in the country in which it was purchased. Your local Infinity® car audio retailer can help you determine the length of your warranty. To register your product, please visit www. infinitysystems. com. SPECIFICATIONS 6030cs Type: 6-1/2" (160mm) 2-Way Component Impedance: 2 Ohms 90W Power Handling, RMS: Power Handling, Peak: 270W Frequency Response: 53Hz ­ 21kHz 93dB Sensitivity (2. 83V, 1m): WARRANTY: Reference Series speakers are warranted against defects. The duration of the speaker's warranty depends on the laws in the country in which it was purchased. Your local Infinity® car audio retailer can help you determine the length of your warranty. To register your product, please visit www. infinitysystems. com. SPECIFICATIONS 6030cs Type: 6-1/2" (160mm) 2-Way Component 2 Ohms Impedance: Power Handling, RMS: 90W Power Handling, Peak: 270W Frequency Response: 53Hz ­ 21kHz 93dB Sensitivity (2. 83V, 1m): WARRANTY: Reference Series speakers are warranted against defects. [. . . ] REF6030CSOM4/09 Infinity is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. I-Mount is a trademark of Harman International Industries, Incorporated. Infinity est une marque commerciale de Harman International Industries, Incorporated, déposée aux États-Unis et/ou dans d'autres pays. I-Mount est une marque commerciale de Harman International Industries, Incorporated. 4-1/4" 110mm 2-1/16" 52mm 1/2" 19mm 1-1/8" 30mm 3-1/4" 84mm 4-1/2" 115mm 1-13/16" 45mm 2-3/8" 60mm 11/16" 17mm 7/8" 22mm 2-1/16" 51mm EN 61000-6-3:2001 EN 61000-6-1:2001 declare in own responsibility that the product described in this owner's manual is in compliance with technical standards: We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du Loir France Declaration of Conformity Klaus Lebherz Harman Consumer Group, Inc. Château du Loir, France 4/09 REFERENCE 6030cs 2x 2x 2x 2x 2x 2x 2x 2x 2x 2x 2x 1x 12x 4x 4x 4x 2x 2x 8x 3 1 2 2 1 3 TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. TWEETER-LEVEL CONTROL This speaker system is equipped with a tweeter-level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "flat" response. Tweeter output may be increased according to the user's preference, or to compensate for offaxis placement (where the speaker does not directly face the listening position), by setting the switch to the "+3dB" position. 3 1 4 2 ROTATING TWEETER This component system includes the I-MountTM feature, an extremely versatile tweeter-mounting system, which is designed to allow the tweeter to be aimed toward the listening position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the tweeter toward the listening position will improve high-frequency response and stereo imaging. With the tweeter mounted in the proper location, rock the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. Secure the small nut to lock the angle, then tighten the large hand nut to lock the rotational position. ROTATING TWEETER This component system includes the I-MountTM feature, an extremely versatile tweeter-mounting system, which is designed to allow the tweeter to be aimed toward the listening position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the tweeter toward the listening position will improve high-frequency response and stereo imaging. With the tweeter mounted in the proper location, rock the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. Secure the small nut to lock the angle, then tighten the large hand nut to lock the rotational position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the tweeter toward the listening position will improve high-frequency response and stereo imaging. With the tweeter mounted in the proper location, rock the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. Secure the small nut to lock the angle, then tighten the large hand nut to lock the rotational position. ROTATING TWEETER This component system includes the I-MountTM feature, an extremely versatile tweeter-mounting system, which is designed to allow the tweeter to be aimed toward the listening position. [. . . ] With the tweeter mounted in the proper location, rock the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. Secure the small nut to lock the angle, then tighten the large hand nut to lock the rotational position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the tweeter toward the listening position will improve high-frequency response and stereo imaging. With the tweeter mounted in the proper location, rock the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. [. . . ]