User manual INFORAD K0

[. . . ] As soon as data is acquired, a tone alerts you to the INFORAD K0 protecting you. If, for any reason, no tone sounds, this means that the satellites have not yet been found. In this case, refer to section 5 "Optimising satellite signal acquisition" and if this does not solve the problem, call our technical support helpline. 4 - Cigarette lighter power adapter Insert the adapter into the cigarette lighter in your vehicle and connect the USB extension cable. [. . . ] If acquisition occurs, there is the strong possibility that your windscreen is a heat reflective one. In this case, identify those areas of your windscreen that are not heat reflective and fit the mounting clip to one of these fields using its self-adhesive strip (making sure that this part of the windscreen is perfectly clean and dry before affixing). Then insert your INFORAD device into the mounting clip. SPEED CAMERA ALERTS and Points Of Interest (POI): your position Type of area Risk zones and radar ( SPECS, GATSO, Digital GATSO, TRUVELO, SAGEM, etc. The speed camera database Your INFORAD is designed to work out of the box and requires no complex installation. It is supplied pre-loaded with a database containing the location and operating direction of over 17, 000 speed cameras across Europe. INFORAD has a team of people constantly verifying this evolution to ensure the best possible coverage. Nevertheless, if you discover an anomaly or a new speed camera position that is not in our latest database, please let us know by using our INFORAD MANAGER software (risk area information form) or our Web site (join the Inforad community). The database evolves continually so as to always ensure that you have maximum protection. Consequently, we recommend that you update your INFORAD device every week using INFORAD MANAGER. The approach and departure distance of speed camera alarms, enable and use the onboard trip recorder, diagnose faults, manage your own user-defined Points of Interest (POIs), download database updates. Please check that your `broadband' or `dial-up' Internet connection is running properly. If the `broadband' or `dial-up' connection is working, go to the next step. If you encounter problems with your Internet connection via INFORAD MANAGER, this may be caused by the anti-virus or firewall software installed on your PC. In this case, you will need to disable the application during the update process. If after following all these points your problem persists, please refer to the `Technical Support' link which can be found in the `Help' section in the INFORAD MANAGER software. You should complete the form describing your problem. We will investigate the problem and endeavour to resolve it for you as quickly as possible. Alternatively, you may send our support team an email. (See Online technical support at the end of this document). [. . . ] About your INFORAD Your INFORAD K0 has been designed to improve road safety by raising your awareness of speed limits. The device does not detect speed cameras but uses the GPS satellite system instead. This makes it legal in most European countries with the exception of Germany and Austria. Nevertheless, we strongly suggest that you consult before travelling to ensure the device complies with local laws. [. . . ]