User manual INTEGRA DHC-80.2

[. . . ] AV Controller DHC-80. 2 Instruction Manual Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Install in accordance with the manufacturer's instructions. [. . . ] 4:3: Picture Mode*1 Custom: All settings can be performed manually. Cinema: Selected when the picture source is movie film, etc. Game: Selected when the picture source is game console. Through: Default values are adapted for all settings. With "Picture Mode", you can change the following settings to be suitable for the movie or game screen by one operation; "Film Mode", "Edge Enhancement", "Mosquito NR", "Random NR", "Block NR", "Resolution", "Brightness", "Contrast", "Hue", "Saturation", "Gamma", "Red Brightness", "Red Contrast", "Green Brightness", "Green Contrast", "Blue Brightness", "Blue Contrast". The receiver has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be performed by an ISF Certified installation technician. Film Mode*2*4*6 Auto: Adjusts to the picture source, automatically selecting "Film Mode". Video: Selected when the picture source is video, etc. Film: Selected when the picture source is movie film, etc. DVD-Video disc content originates from either film (recorded at 24 frames per second) or video intended for TV (recorded at 30 frames per second). With the default "Film Mode" setting of "Auto", the AV controller automatically detects the type of content and processes it accordingly to achieve the best picture quality. If the AV controller detects the type of content incorrectly due to characteristics of the disc, you can select "Video" or "Film" manually. Edge Enhancement*2*4*7 Off: Edge enhancement off. With Edge Enhancement, you can make the picture appear sharper. Full: Zoom: Wide Zoom: Smart Zoom: En 62 Mosquito NR*2*3*4*6 Off: Mosquito noise reduction off. With Mosquito Noise Reduction, you can remove the shimmering or haziness that sometimes appears around objects in the picture. Mosquito noise can be an issue with overly compressed MPEG content. Random NR*2*3*4*6 Off: Random noise reduction off. With Random Noise Reduction, you can remove indiscriminate picture noise, such as film grain. Block NR*2*3*4*6 Off: Block noise reduction off. With Block Noise Reduction, you can remove the block distortion that sometimes appears in the picture. [. . . ] Case2: If an error occurs, "Error!!*-** No media" is displayed on the front display of the AV controller. (Alpha-numeric characters on the front display are denoted by asterisks. ) See the following table and take appropriate action. Errors during update via USB Error Code *-10, *-20 Description USB storage device is not detected. [. . . ]