User manual INTEL DESKTOP BOARD DH61DL

[. . . ] Intel Desktop Board DH61DL Product Guide Order Number: G23557-002 Revision History Revision -001 -002 Revision History First release of the Intel Desktop Board DH61DL Product Guide Second release of the Intel Desktop Board DH61DL Product Guide Date February 2011 April 2011 Disclaimer INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL?S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. [. . . ] Table 6 shows the pin assignments and signal names for the internal mono speaker header. Internal Mono Speaker Header Signal Names Pin 1 2 Signal Name ?+ 43 Intel Desktop Board DH61DL Product Guide Front Panel USB 2. 0 Headers Figure 19, C shows the location of the front panel USB 2. 0 headers and Table 7 shows the pin assignments and signal names. Front Panel USB 2. 0 Headers Signal Names Pin 1 3 5 7 9 Signal Name Power (+5 V) DD+ Ground Key Pin 2 4 6 8 10 Signal Name Power (+5 V) DD+ Ground No Connection NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device. Front Panel Header Figure 19, D shows the location of the front panel header. Table 8 shows the pin assignments and signal names for the front panel header. Front Panel Header Signal Names Pin 1 3 5 7 9 Description In/Out Pin 2 4 6 In Power Power Out 10 No pin 8 Description Power LED Front panel LED+ Front panel LEDOn/Off Switch Power switch Ground Not Connected In Out Out In/Out Hard Disk Drive Activity LED Hard disk LED pull-up to +5 V Out Hard disk active LED Reset Switch Ground Reset switch Out NOTE When connecting individual wires from your chassis front panel to the front panel header, be sure to observe the connection polarity. Positive wires are usually solid color and negative wires are usually white or striped. 44 Installing and Replacing Desktop Board Components Alternate Front Panel Power LED Header Figure 19, E shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. Table 9 shows the pin assignments for the alternate front panel header. Alternate Front Panel Power LED Header Signal Names Pin 1 2 3 Signal Name Front panel LED+ No pin Front panel LEDOut In/Out Out Serial Header Figure 19, F shows the location of the serial header. Table 10 shows the pin assignments and signal names for the serial header. Serial Port Header Signal Names Pin 1 3 5 7 9 Signal Name DCD (Data Carrier Detect) TXD# (Transmit Data) Ground RTS (Request To Send) RI (Ring Indicator) Pin 2 4 6 8 10 Signal Name RXD# (Receive Data) DTR (Data Terminal Ready) DSR (Data Set Ready) CTS (Clear To Send) Key (no pin) Chassis Intrusion Header Figure 19, G shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. This switch should be in the open position when the chassis cover is installed and closed when the cover is removed. Table 11 shows the pin assignments and signal names for the chassis intrusion header. Chassis Intrusion Header Signal Names Pin 1 2 Description Intruder# Ground 45 Intel Desktop Board DH61DL Product Guide S/PDIF Header Figure 19, H shows the location of the S/PDIF output header. Table 12 shows the pin assignments and signal names for the S/PDIF output header. S/PDIF Header Signal Names Pin 1 2 3 4 Description Ground S/PDIF Out Key (no pin) +5 VDC Connecting to the Audio System After installing the Realtek audio driver from the Intel Express Installer DVD-ROM, the multi-channel audio feature can be enabled. Figure 20 shows the back panel audio connectors. The default connector assignments are shown in the table. Item A B C Description Line in Line out (front speaker/headphones) Mic in Figure 20. [. . . ] Japan VCCI (Voluntary Control Council for Interference) mark. Korea Certification mark. Includes an adjacent KCC (Korean Communications Commission) certification number: KCC-REM-CPU-DH61DL (B). Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. [. . . ]