User manual INTEL SMALL BUSINESS SERVER

[. . . ] Solution Deployment Guide: Mid-Level Small Business Server with Advanced Reliability 10 to 40 users Premium set of services For Unsophisticated and Sophisticated small businesses that require more advanced server-based services with higher level of reliability Revision 2. 03 2 Oct 2006 -2The information contained in this document is provided for informational purposes only and represents the current view of Intel Corporation ("Intel") and its contributors ("Contributors"), as of the date of publication. Intel and the Contributors make no commitment to update the information contained in this document, and Intel reserves the right to make changes at any time, without notice. THIS DOCUMENT IS PROVIDED "AS IS. " NEITHER INTEL, NOR THE CONTRIBUTORS MAKE ANY REPRESENTATIONS OF ANY KIND WITH RESPECT TO PRODUCTS REFERENCED HEREIN, WHETHER SUCH PRODUCTS ARE THOSE OF INTEL, THE CONTRIBUTORS, OR THIRD PARTIES. INTEL AND ITS CONTRIBUTORS EXPRESSLY DISCLAIM ANY AND ALL WARRANTIES, IMPLIED OR EXPRESS, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, NON-INFRINGEMENT, AND ANY WARRANTY ARISING OUT OF THE INFORMATION CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION, ANY PRODUCTS, SPECIFICATIONS, OR OTHER MATERIALS REFERENCED HEREIN. [. . . ] For this solution you don't need to use those advanced features. RAID Web Console Installation 1. Browse to \4 ­ RAID Console folder on Small Business Server Hardware Deployment CD 2. Click Next in "RAID Web Console Package Setup" window 4. Read thru license agreement and make appropriate selection. Select StandAlone setup type and click Next 7. Leave selected components unchanged and click Next 8. Click Continue to install Java Runtime Environment 9. In Setting Password window enter password that you would like to set for managing RAID. You should not leave the password blank, as it can be used for managing the RAID remotely. Click Finish NOTE: RAID Web Console can be accessed by typing http://localhost:3570 in Internet Explorer after system reboot. To make any changes in RAID configuration, you will need to select Full Access. You may want to create a shortcut for the RAID Web Console URL. NOTE: If you experience problems logging into RAID Web Console in Full Access mode, use View Only mode first without entering password, then click Exit, then login in Full Access mode with password. NOTE: If hard-drive failure occurs, sound alarm on the RAID Controller will be activated. Configure Data Drive 1. Right click on the My Computer icon and select Manage 2. Navigate to Disk 0 in the bottom plane, right-click on the Unallocated partition and choose New Partition 4. Click Next in the Welcome to the New Partition Wizard. At Select Partition Type select Primary Partition. Accept the default maximum size and click Next 7. At the Assign Letter or Path dialogue, choose E and click Next 8. At the Format Partition accept the default settings (file system should be NTFS) and click Next. (DO NOT select Perform a quick format) 9. [. . . ] Check that J9H3 jumper is set to pins 1-2 (Normal Operation mode). No video, though fans are spinning Operating system will not boot. RAID Array In RAID BIOS Console go to Adapter Properties RAID Controller may report that "Battery life is low" during POST. This is likely a false warning if the Battery Backup Unit is new. [. . . ]