Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual INTERMATIC FL400HPS. We hope that this INTERMATIC FL400HPS user guide will be useful to you.
Lastmanuals help download the user guide INTERMATIC FL400HPS.
Detailed instructions for use are in the User's Guide.
[. . . ] A mounting suitable for outdoor use and rated for wet locations is required. Follow all applicable electrical codes and regulations.
WARNING: Electric shock hazard WARNING: Fire hazard
Disconnect power at circuit breaker or fuse box before installing or servicing light. (Use MIN 105°C SUPPLY CONDUCTORS if cord is not used) CONNECT TO SUPPLY IN EXTERNAL JUNCTION BOX ONLY. [. . . ] 13.
Metal Halide 250 & 400 Watt High Pressure Sodium 250 & 400 Watt Figure 4 Figure 3 Using provided twist on or other approved connectors, connect the fixture wires to the 3-wire cord. Connect the selected voltage fixture wire to the Black (hot) cord wire. Connect the white fixture wire marked "COM" to the White (neutral) cord wire. Connect the Green (equipment ground) cord wire to the fixture ground screw. Confirm all unused fixture wires are capped. Replace and secure reflector/lampholder assembly with (4) screws. Install the fixture to the Trunion Mounting Bracket using the (2) Trunion Bolts. On the trunion assembly there are (3) position holes in the outer yoke and (5) positioning hoes in the inner yoke. Align the positioning holes as desired and secure with Positioning Screw. Using approved twist on wire connector, connect the free end of the 4ft cord to the supply wires inside an approved outdoor, watertight junction box. Connect the Black (hot) cord wire to the Black (hot) supply wire. Connect the White (neutral) cord wire to the White (neutral) supply wire. Connect the Green (equipment ground) cord wire to the Green (equipment ground) supply wire. Screw lamp into lampholder until finger-tight. [. . . ] Remove old lamp and replace with new lamp of correct type and wattage. Screw lamp into socket in lampholder until finger-tight. Install, close, and secure lens cover with (2) screws making sure that gasket is properly seated, free of debris, and compressed to seal out moisture. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC FL400HPS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC FL400HPS will begin.
