User manual INVION GPS-4V1

[. . . ] GPS NAVIGATION SYSTEM GPS-4V1 INSTRUCTION MANUAL Congratulations on choosing your new Invion product. We have every expectation that you will be completely satisfied with your new purchase. To always guarantee optimal function and performance of your product, we would ask the following: · Before using the product for the first time, carefully read the operating instructions and adhere to the safety precautions!· All activities at and with this product may only be carried out as described in these operating instructions. [. . . ] The new name is displayed on the Avoid Roads screen. Select a group and tap this button to remove the group from the Avoid Roads screen. The road entries in this group are also removed. Edit Group Delete Group 1 Avoid Road Locations When you tap Default or an Avoid Roads group, the navigation device displays the group screen, which lets you select roads to avoid. From this screen, you can use the Allow or Avoid buttons to include or exclude a selected road when calculating a route. Figure 27 - Adding a Road to Avoid Notes: You cannot specify a particular toll road. You can tap the Actions button from this screen to select from the following commands: Add Road Edit Road Delete Road Show on Map Information Lets you select a road. An address screen appears for you to specify a town and street. When you have completed updating your road information, tap Save. Lets you rename the road and select a different group. When you have made your changes, tap Save. Select a road and tap this button to remove the road from your group. The system no longer avoids the removed road. Lets you show the map with the displayed destination for you to review before creating a route. This button displays the location's address information. Route Playback This feature lets you record your route as you're driving and then to play it back on the Main Map screen. To record a route, tap the Record button in the Route Playback screen. The navigation device shows the Main Map screen and navigates you to the selected destination. To stop recording, return to the Route Playback screen and tap the Stop button. To playback your recording, select the data file, and tap the Play button. The navigation device plays the recorded route on the Main Map screen. To stop the playback, return to the Route Playback screen and tap the Stop button. Route Playback Actions You can tap the Actions button to display the following commands: Delete Recording Clear All Recordings Playback Speed This button lets you remove a selected recording. Use the arrow keys to adjust the playback speed. The range is from 100% to 00%. Quick Navigation You can define the QuickNav location by selecting either the To Predefined Address or To Nearest POI Category in the QuickNav Settings screen. When the location is selected, you can navigate to your address by tapping the QuickNav button displayed on the Main Map screen. [. . . ] Although the unit is a precision navigation device, any navigation device can be misused or misinterpreted and therefore, become unsafe. Important Information Map Data Information: On virtually all data sources contain inaccurate or incomplete data to some degree. This is particularly true outside the United States, where complete and accurate digital data is either not available or prohibitively expensive. Notice to drivers in California and Minnesota: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. [. . . ]