User manual IOGEAR GBP301

[. . . ] It complies with USB 1. 1, IEEE 1284, and the Bluetooth 1. 1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 330ft (100 meters). This unit supports HCRP (Hardcopy Cable Replacement Profile) and SPP (Serial Port Profile), all of which resides on onboard flash memory. The RF circuitry on the RF chip includes complete receiver and transmitter functions. [. . . ] You have completed installing the IOGEAR Bluetooth Combo Print Adapter. Print from a Bluetooth enabled computer From your application (i. e. MS Word) choose to print as a normal printer. You can have up to seven devices (computers or PDAs) connected to the Bluetooth Combo Print Adapter, it works on first come first serve basis. If there are more than one printers, select the printer connected to the Combo Print Adapter as the printer you are going to send the print job to. Print from a Bluetooth enabled PDA There are various PDA operating systems, in this manual we will cover Pocket PC 2003 and Windows CE 3. 0. Setup and Print from a Bluetooth enabled PDA using Microsoft Pocket PC 2003 Professional Edition. The PDA we used for the following example is the HP iPAQ Pocket PC h1945. You need to download and install HP Mobile Printing from the HP website to add printing function to the PDA. Turn on the PDA, and click on the Bluetooth icon. Turn on Bluetooth by tapping at the Bluetooth Manager. Bluetooth Icon 13 Application 2. The Bluetooth Manager window appears, tap at the middle the screen where it says "Tap New". 3. The Connection Wizard window appears, highlight Explore a Bluetooth device and then tap on Next. 14 Application 4. Tap on Device (where it says No device selected), and then tap on Next. At the Bluetooth Browser window, select Bluetooth Combo Print Adapter. 15 Application 6. This takes you back to the Wizard window, and you can see the Combo Print Adapter is already selected as the device. Tap on next, you are prompted that the shortcut is already created, tap on Finish. 16 Application 8. Now from the Bluetooth Manager window, you can see that the shortcut is already created. Close this window by tapping on " x " at the upper right corner of the screen. Tap on Start again and select HP Mobile Printing. 17 Application 10. Tap on Start Using the Program in the HP Mobile Printing window. Select the target document to be printed, then tap on Print. 18 Application 12. The Print Configuration window appears, tap on Configure. [. . . ] Select Bluetooth serial port and tap on Next. You can see that the Combo Print Adapter is already on the shortcut list of the Bluetooth Manager. 27 Application To further investigate the connection, tap on Bluetooth Combo Print Adapter, you can see the following screen. Now if you tap the Active Connections at the bottom of the Bluetooth Manager window, you can see that the Bluetooth Combo Print Adapter is connected to the PDA. 28 Application 10. Now tap on start, then select Program, and select PrintPocketCE as the program by tapping its icon. [. . . ]