User manual IOGEAR GCS1794 INSTALLATION GUIDE

[. . . ] Front Panel USB 2. 0 Peripheral Sharing Port 1 2 3 4 5 7 Rear View 1. CPU1 USB Port 1 2 345 678 9 10 11 8 12 13 14 15 16 GCS1794 Overview Front View 1. Front Panel Console Analog Audio Port 7. Front Panel USB 2. 0 Peripheral Sharing Port 1 23 4 5 6 7 9 Rear View 1. [. . . ] But instead, the audio will follow the KVM focus. 20 Auto Scanning You can either activate Autoscan Mode via front panel push button or hotkeys. Function Front Panel Push Button Press and hold port 1 and port 2 Pushbutton simultaneously for 2 seconds to activate Autoscan Mode* [Scroll Lock] [Scroll Lock] [a] [Enter] [Scroll Lock] [Scroll Lock] [a] [n] [Enter] Description Activate Autoscan mode. It will cycle from port to port every 5 seconds (default) Activate Autoscan mode. It will cycle from port to port every 5 seconds (default) Activate Autoscan mode. It will cycle from port to port every n seconds** Hotkeys Hotkeys *Note: Autoscan Mode from front panel push button will be scanning a port every 5 seconds by default. If you wish to have the Autoscan Mode be scanning with different time interval, please refer to trigger Autoscan Mode from hotkeys. **Note: n is an interval between 1 and 99 that stands for the time (in second) desire for scanning each port. 21 Hotkey Setting Mode (HSM) Hotkey 1. Press and hold [Num Lock] ([Clear] key on Mac keyboard) 2. Release [Num Lock] ([Clear] key on Mac keyboard) Invoke HSM, then press [h] Invoke HSM, then press [t] Invoke HSM, then press [F2] Invoke HSM, then press [F10] Description Invoking hotkey setting mode Change the HSM invocation keys from [Num Lock] to [Ctrl] and from [-] to [F12] Switch port switching hotkey sequence between [Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl] Enables Mac keyboard emulation Auto-detect the keyboard operating platform (for PC compatible systems). Activates Pass Through Keyboard Mode (keystrokes are sent directly to the computer instead of through the Mac emulator). List hotkey settings ­ simply invoke the hotkey and then open a text editor, such as notepad, and use the Paste function to display the hotkey settings. 22 Invoke HSM, then press [F4] Invoke HSM, then press [F5] Invoke HSM, then press [b] Invoke HSM, then press [x] [Enter] Invoke HSM, then press [u] [p] [g] [r] [a] [d] [e] [Enter] Invoke HSM, then press [r] [Enter] Invoke HSM, then press [d] Invoke HSM, then press [s] USB Reset Toggle hotkey beepers on or off Disable or enable port switching hotkey Activate Firmware Upgrade Mode ­ Front panel KVM LED will flash indicating Firmware Upgrade Mode is activated. Restore default settings Enable or disable video emulation Toggles between default and alternative front panel pushbutton operation settings. Enable or disable mouse emulation Reset keyboard and mouse under some special OS' that do not support USB 2. 0 Invoke HSM, then press [m] Invoke HSM, then press [F1] *Note: To exit HSM manually, press Esc or spacebar. 23 Mac Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. The emulation mappings are listed in the table below. PC Keyboard [Shift] [Crtl] Mac Keyboard Shift Ctrl [Ctrl] [1] [Ctrl] [2] [Ctrl] [3] [Ctrl] [4] 24 [Alt] [Print Screen] [Scroll Lock] Alt F13 F14 = [Enter] [Backspace] [Insert] [Ctrl] Return Delete Help F15 *Note: When using key combinations, press and release the first key (Ctrl), then press and release the second key. 25 Factory Default Hotkeys Settings Function Port Switching Invoking HSM Auto Scan Interval Beeper Keyboard Operating Platform Port Switching Keys Mouse Emulation Default [Scroll Lock] [Scroll Lock] [Num Lock] [-] 5 Seconds On PC Compatible Enabled On 26 Firmware Upgrade Note: In order to perform a firmware upgrade, you need to use a computer that's not connected to the KVM. Step 1 Connect the provided firmware upgrade cable to the firmware upgrade port of the KVM and the serial port of your computer. Connect power adapter to your power outlet and the KVM. Step 2 Go to www. iogear. com to download the latest available firmware or the specific firmware that you wish to upgrade to. Step 3 Shut down all the computers that are connected to the KVM. (Please refer to Hotkeys Setting Mode section. ) Step 4 Extract the file with WinRAR or compatible software. Then double click on the execute file to begin with the Firmware Upgrade Utility. 27 Step 5 Read the License Agreement and click "I Agree" then click "Next" if you wish to continue with the firmware upgrade. 15. 105(b) his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. [. . . ] End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 35 CE Statement This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. The product has been approved for LVD and covered the following countries: Belgium, Denmark, France, Germany, Italy, Portugal, U. K. , Spain, Sweden 36 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions, or updates. [. . . ]