User manual IOGEAR GHE135U INSTALL GUIDE

[. . . ] Finder is a trademark of Apple Computer, Inc. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR® makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. [. . . ] USB A to B cable 1 2 3 4 5 6 7 8 13 Installation of Hard Drive Step. 7 Attach the hard drive into the hard drive bracket. Screw the four screws into the drive bracket that were provided with the hard drive. Make sure you take all the necesssary steps to avoid ESD (electric static discharge). 14 Installation of Hard Drive Step. 8 Attach the signal cable to the hard drive connector of the hard drive with bracket attached. Attach the power cable to the hard drive in the powere socket. Attach the bracket with drive attached into the enclosure and seat over the base plate. Line up the holes in bracket with the base plate. 15 Installation of Hard Drive Step. 9 Insert two screws through bracket and tighten down bracket to base plate. 16 Installation of Hard Drive Step. 10 Place side cover on enclosure and secure by sliding in forward direction. Replace screw in side panel in bottom edge. Step. 11 Place assembled enclosure back into the base. 17 Installation of ION Drive Software Step. 3 Double click "ION" driver. Insert the IOGEAR Installation CD into your computer's CDROM tray (It is not necessary to install this driver under Window 2000, ME, and XP). Step. 2 Select "ION" in My Computer. 18 Installation of ION Drive Software (Continued) Step. 4 Click "Next" on Installation Wizard screen. Step. 5 We recommend to choose "Complete" when prompted how to install. Step. 6 After the installation, you will be able to find the hard drive in My Computer after you turn on the power of ION. 19 Connecting ION Drive to Your Computer 1 2 Note: Before you begin, please make sure that the power to the device and your computer has been turned off. Plug the Hi-Speed USB 2. 0 cable with Type A connector into the back of the IONTM Drive Step 2. Plug the Power Adapter into the back of the IONTM Drive 20 Connecting ION Drive to Your Computer 1 Step 3. Plug the Hi-Speed USB 2. 0 Cable (Type A Connector) into the Hi-Speed USB 2. 0 Port (Type A Slot) located on the back of your computer in the PCI Card Bays. Plug power into your power strip Step 5. [. . . ] Spin down - The act of the disk inside the drive or cartridge ceasing its rotation. Spin up - The act of the disk inside the drive getting up to the proper rotations per minute. The disk inside the drive must spin at the proper speed for the disk to work. 30 Specification Product Specification (MODEL: GHE135U) Function Power Consumption Input Voltage Connector Type Storage Temperature Operating Temperature Operating Humidity Dimensions Weight EMI Specification 15w 12V DC, 1. 6A USB 2. 0 Type A 0-70 C (Celsius) 0-50 C (Celsius) 20 to 89% (Non Condensing) 3. 5" x 6. 0" x 8. 0" 1. 5 pounds FCC Class B 31 Radio & TV Interference Statement Radio & TV Interference Statement WARNING!!!This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. [. . . ]