User manual IOGEAR GIC251U

[. . . ] System Requirements Minimum System Requirements Macintosh · PowerMac G3 (Blue & White Tower) or later · Mac OS v8. 6 or higher -- Mac OSX 10. 1. 5 or higher is required for USB 2. 0 functionality · 64MB of RAM · Available PCI Slot PC · Pentium® or K6® -class processor (266Mhz or higher) · Windows 98 Second Edition or later · 64MB of RAM · Available PCI Slot Recommended System Requirements Macintosh · PowerMac G4 1. 0Ghz or higher · Mac OSX 10. 2. 5 (Jaguar) or later · 256MB RAM · Available PCI Slot PC · AMD Athlon® 2100+ or Intel Pentium® 4 2. 0Ghz Processor · Microsoft Windows XP or later · 256MB RAM · Available PCI Slot Hi-Speed USB 2. 0 PCI Card GIC251U User Manual Note: Your order has been carefully packaged and inspected, and we hope you are pleased with the IOGEAR product you purchased. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact your dealer immediately for assistance. Read this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and/or any devices it connects to. [. . . ] Please use care anytime you open your Mac or PC and follow the manufacturer's guidelines for proper handling proceedures. Step. 6 Once you have rebooted, your Hi-Speed USB 2. 0 PCI card is ready for operation. Step. 3 The Add New Hardware wizard will appear. Click "Next" to continue. WINDOWS 2000 & XP Your Windows 2000/XP operating system natively supports the USB 2. 0 PCI card - No drivers are necessary!However, please ensure you have the latest Service Packs installed. . . · Windows 2000 - Service Pack 3 or later · Windows XP - Service Pack 1 or later Step. 4 You will be asked for the USB 2. 0 drivers. Please open My Computer, then open your CD-ROM (affectionately named IOGEAR). 6. MAC Installation Instructions MACINTOSH - OS v8. 6 THRU OS v9. X NOTE: Your Mac will be able to take full advantage of USB v1. 1 functionality of the PCI card. USB 2. 0 is only supported under Mac OSX 10. 1. 5 and above. MACINTOSH - OSX 10. 1. 5 AND LATER Step. 1 Insert the IOGEAR CD-ROM into your Mac. Step. 5 When installation is complete, you are ready to use your new IOGEAR HiSpeed USB 2. 0 PCI card. Step. 1 Ensure you have the following extentions installed on your Mac. The PCI card will not function without the following extentions installed. · Apple USB Adapter Card Support v1. 4. 1 or later · Apple Mass Storage Support v1. 3. 5 or later · Apple Firewire Support v2. 5 or later All extentions can be obtained from the following websites: · http://www. apple. com/support/ · http://www. versiontracker. com/ · Run the Software Update utility under the Apple Menu. Step. 2 Open the folder GIC251U -Open the OSX 10. 1. X folder If you are running OSX 10. 1. 5 or later -Open the OSX 10. 2. X folder If you are running OSX 10. 2. 5 or later Step. [. . . ] IOGEAR® is not responsible for any radio or television interference caused by unauthorized modification of your mechanism or cables. 8. Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. [. . . ]