User manual IOGEAR GME223R

[. . . ] The small and portable design saves precious space in your mobile work area, and it is one less tangled wire in your laptop carrying case. The ergonomically contoured design and optical sensor offer comfortable use on most surfaces, without the need for a mouse pad. This mouse features 800 dpi resolution, meaning it offers twice the accuracy of typical mouse movement, which is ideal for graphic designing or any other type of computing where precision matters. This unit is USB ready, Plug-nPlay and hot pluggable. [. . . ] We do recommend that you charge the batteries for 10 hours before using the mouse. To charge the batteries, just plug the USB charger cable into the USB port on you computer, and the mouse, and leave it on for a few hours. 1 2 3 4 5 For the USB Receiver: 10. Connect Button 10 4 11 9 9 BACK 7. Turn on your computer, and let it boot all the way into the operating system 2. Insert the USB receiver into one of the USB port on your computer. You will see a dialog box, indicating that the computer has detected a new USB device. For Windows 98/98SE, a dialog box will come up to prompt you to insert the 98/98SE CD into the CD ROM in order to obtain the USB driver. For the computers where the USB ports are placed in an inaccessable area, you will need to plug the USB extension cable (included in the package) into the USB port on the computer, then plug the receiver into the USB extension cable 3. After a few seconds, the light in your mouse will begin to flicker. This is normal, and should last until the mouse and the receiver are connected. Press the connect button on the mouse, then press the connect button on the receiver. After you release the connect button, the mouse is ready for use. Just plug the receiver in the USB port, then press the connect button on both the mouse and the receiver. You will be able to use the mouse immediately after that. Please avoid using this mouse on glass, mirror and metal surfaces. Please do not place any other RF unit close to the mouse and its receiver to avoid interference. When travelling, please turn the power On/Off switch to the OFF position in order to save battery life. You do not need to turn the power off if the mouse is sitting still, the power consumption will be lowered automatically after you stop using the mouse for a while. When the mouse movements turn sluggish, it may be the time for you to recharge the batteries. Just plug the USB charger cable into the USB port on you computer, and the mouse, and leave it on for a few hours. [. . . ] Operation of this equipment is a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. There is no guarantee that radio frequency interference will not be created in particular locations. IOGEAR® is not responsible for any radio or television interference caused by unauthorized modification of your mechanism or cables. 10. Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. [. . . ]