User manual IOGEAR GUN161

[. . . ] · A new dialog box should appear, make sure the default setting is selected ("Search for the best drivers for your device") and click NEXT to continue. · If you are prompted again to insert an installation CD ignore and continue on. · Check Specify a location and click Browse · Find the UN161 folder found on the CD. Select the folder related to your OS version. [. . . ] Double click the installer VISE icon and run through the installation. After the installation completes, a new Mac USB Data Bridge folder that contains the program and related files is created. For convenience, you can drag the Mac USB Data Bridge program icon onto your desktop. 5. Operation The program enables you to connect a Mac to PC, PC to PC, or Mac to Mac for file management and transfer purposes. PC/Windows Operation · File Management 1. With the computers up and running, plug the USB Network Cable into both computers. On each computer, Double Click on the USB Bridge program's shortcut icon (on the desktop). The USB Bridge Cable Application's main window appears: Note: While not required, it is best to restart the computer before running the program. Note: While not required, it is best to restart the computer before running the program. PC Operation Cont. 3. The main window is divided into two panels. The local computer's file and directory structure appears in the top panel; the remote computer's file and directory structure appears in the bottom panel. The directory windows operate in a similar manner to the familiar Windows Explorer file manager. You can create and delete folders; copy and delete files; etc. Using the usual menu bar commands, as well as drag and drop. These operations work both within a window, and between windows. To print text and document files located on either computer with your local printer, Click on the file, then select Print from the File menu. Note: There are two status indicators (that look like traffic lights) at the bottom right corner of the window. The left indicator is for the local computer; the right indicator is for the remote computer. They are green when the connection is good; red when a connection has not been established. Both lights must be green in order to exchange files between the local and remote computers. PC Operation Cont. Wakeup Power Management an d Remote The USB Bridge Cable Application supports USB power management; a feature that is critical when working with Notebooks and other mobile computers. When either computer goes into suspend mode, the program draws less than 500µA of current from it. The program also supports remote wakeup. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Function Connector Cable Length Data Transfer Rate Network Protocol Power Consumption Operating Temperature Specification 2 USB Type A Plugs 1. 8 m (. 9 m per segment) Up to 6 Mbps TCP/IP, NETBEUI, IPX/SPX 120 mW (max. ) 5 ~ 40û -20 ~ 60û 0 ~ 80% RH, Noncondensing Plastic 160 g Note: There are two status indicators (that look like traffic lights) at the upper left. The left indicator is for the local computer; the right indicator is for the remote computer. [. . . ]